120 mm Fan Guard, Wire

STEP · STL Supports CommunityCAD0 downloads
120 mm Fan Guard, Wire
1 / 6

120 mm Fan Guard, Wire

With eyelets 104.78 mm apart for 4.57 mm screws, the 120 fan guard (Wire fan guard) is 115.6 mm across its outer ring and 5.9 mm high. Here as simplified STEP files.

120 fan guard, Wire fan guard

How these parts are made, and what the levels mean: read the method

  • Also known as: 120 fan grill, 120 finger guard, 120 wire fan grille
  • Model id: fan-guards-120
  • Standard: Wire fan guard · size 120

Files

Part keySimplified
fan-guards-120STEP

Dimensions

Dimension symbols for 120 fan guards (Wire fan guard)

SymbolNameminnommaxModeledRuleLevel
eMounting hole spacing104.78104.78nominalL1
dhMounting hole diameter4.574.57nominalL1
DOutside ring diameter115.6115.6nominalL1
hGuard height5.95.9nominalL1
d_ringRing wire diameter1.81.8nominalL1
d_ribRib wire diameter1.81.8nominalL0 (nom: one source)

Drawing

Drawing of the 120 fan guard with its values (Wire fan guard)

As a PDF: CC-FANGUARD-SZ-120.pdf.

The 120 fan guard beside the 92

The 120 is the last of the 6 Wire fan guards published here, listed from 30 to 120.

  • Mounting hole spacing (e): 104.78 mm on the 120 fan guard, against 82.42 mm on the 92.
  • Mounting hole diameter (dh): 4.57 mm on the 120 fan guard, the same on the 92.
  • Outside ring diameter (D): 115.6 mm on the 120 fan guard, against 89.8 mm on the 92.
  • Guard height (h): 5.9 mm on the 120 fan guard, against 5.5 mm on the 92.
  • Ring wire diameter (d_ring): 1.8 mm on the 120 fan guard, against 1.6 mm on the 92.
  • Rib wire diameter (d_rib): 1.8 mm on the 120 fan guard, the same on the 92.

Other sizes

Conventions

  • Simplified only: one solid of wire rings, ribs and eyelets. STEP AP214, millimetres, Z along the guard axis, mounting face at Z = 0, ring tops at Z = h.
  • Wire layout illustrative, not any maker's design; hole pattern, outside diameter, height and wire sizes from maker drawings.

Documents

Sources

mechatronics-fan-guards, qualtek-fan-guards, sepa-fan-guards. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-FANGUARD-DS-120.pdf

* CC-FANGUARD-DS-120 rev A '?) CommunityCAD Size datasheet - 120 120 mm wire fan guard Size datasheet: this guard's values with their levels, conventions and sources. Wire layout illustrative, not any maker's design; hole pattern, outside diameter, height and wire sizes from maker drawings. Fits…

View full datasheet →

docs/CC-FANGUARD-SZ-120.pdf

Wire fan guard, square DC axial fans, 120 Size drawing - 120 values on the views - scale 1:1 Hole spacing e = 104.78 Hole diameter (eyelet inside) Outside ring diameter Height dring Ring wire diameter drib — Rib wire diameter dring = 1.8 e = 104.78 Source levels Main value = the modeled value…

View full datasheet →