15 mm Laptop Drive, SFF-8201

STEP Supports CommunityCAD0 downloads
15 mm Laptop Drive, SFF-8201
1 / 6

15 mm Laptop Drive, SFF-8201

The 15 mm laptop drive (SFF-8201) is 15 mm high, 69.85 mm wide and 100.2 mm long, with M3 side holes 14 mm and 90.6 mm from the connector end; M3 bottom holes 61.72 mm apart across. Beside SFF-8201, its sources include documents from Seagate. Modeled as simplified and threaded STEP files.

15 laptop drive, SFF-8201

How these parts are made, and what the levels mean: read the method

  • Also known as: 15 SATA SSD, 15 laptop hard drive, 15 notebook hard disk, 15 solid state drive
  • Model id: drives-2-5-15
  • Standard: SFF-8201:Rev 3.4 · size 15

Files

Part keySimplifiedThreaded
drives-2-5-15STEPSTEP

Dimensions

Dimension symbols for 15 laptop drives (SFF-8201)

SymbolNameminnommaxModeledRuleLevel
HDrive height14.5151515nominalL2
WDrive width69.8570.169.85nominalL2
LDrive length100.2100.45100.2nominalL2
LcLength over the serial connector100.5 ref100.5reference valueL2
hsSide hole height33nominalL2
xs1First side hole from the connector end1414nominalL2
xs2Second side hole from the connector end90.690.6nominalL2
ybBottom hole from the side4.074.07nominalL2
yb2Bottom holes across61.7261.72nominalL2
xb1First bottom hole from the connector end1414nominalL2
xb2Second bottom hole from the connector end90.690.6nominalL2
dsSide hole thread33nominalL2
dbBottom hole thread33nominalL2
tsSide hole full thread depth33single limit (min), modeled at the limitL2
tbBottom hole full thread depth2.52.5single limit (min), modeled at the limitL2
dlLead-in diameter (the specification's example)3.75 ref3.75reference valueL2
alLead-in angle (the specification's example)90 ref90reference valueL2
cwConnector overall width42.73 ref42.73reference valueL2
csConnector datum B width33.39 ref33.39reference valueL2
cbSide to datum B13.43 ref13.43reference valueL2
cyConnector offset from the drive centreline4.84.8nominalL2
czConnector height above the bottom3.123.53.883.5nominalL2
chConnector housing height4 ref4reference valueL2
cxConnector protrusion0.3 ref0.3reference valueL2
ccDatum C to the bottom hole9.49.4nominalL2

Drawing

Drawing of the 15 laptop drive with its values (SFF-8201)

As a PDF: CC-DRIVE25-SZ-15.pdf.

The 15 laptop drive beside the 9.5

The 15 is the last of the 3 SFF-8201 laptop drives published here, listed from 7 to 15.

  • Drive height (H): 15 mm on the 15 laptop drive, against 9.5 mm on the 9.5.
  • Drive width (W): 69.85 mm on the 15 laptop drive, the same on the 9.5.
  • Drive length (L): 100.2 mm on the 15 laptop drive, the same on the 9.5.
  • Length over the serial connector (Lc): 100.5 mm (reference) on the 15 laptop drive, the same on the 9.5.
  • Side hole height (hs): 3 mm on the 15 laptop drive, the same on the 9.5.
  • First side hole from the connector end (xs1): 14 mm on the 15 laptop drive, the same on the 9.5.
  • Second side hole from the connector end (xs2): 90.6 mm on the 15 laptop drive, the same on the 9.5.
  • Bottom hole from the side (yb): 4.07 mm on the 15 laptop drive, the same on the 9.5.

Other sizes

Conventions

  • STEP AP214, millimetres, the bottom face at Z = 0 centred on the origin, the length along X with the connector end toward +X.
  • Outline, mounting holes, threads and the connector's place from SFF-8201 Rev 3.4 and SFF-8223 Rev 2.7 (Option 1), the free SNIA specifications, at their nominals.
  • Illustrative, not dimensioned by SFF: the edge rounds, the top label recess and label with the CommunityCAD mark, the connector's depth into the drive and its slot.

Documents

Sources

seagate-100804767j-figures, sff8201-r3-4, sff8223-r2-7. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DRIVE25-DS-15.pdf

'?) CommunityCAD CC-DRIVE25-DS-15 revA Size datasheet - 15 mm SFF-820115 mm drive Size datasheet: this size's values with their levels, conventions and sources. 15 mm, front view, 1:5 Le hs xsi xs2 yb yb2 xb1 xb2 ds db ts tb du al cw cs cb cy cz ch cx cc yc Dimension Height, A1 (SFF-8201) Width,…

View full datasheet →

docs/CC-DRIVE25-SZ-15.pdf

2.5-inch drive envelope, 15 mm Size drawing - 15 mm values on the views - scale 1:2 xs2 = 90.60 - xs1 = 14.00 2 H = 15.00 10 hs = 3.00 peep L = 100.20 ds = 3, ts = 3.00 db = 3, tb = 2.50 yb2 = 61.72 xb1 = 14.00 xb2 = 90.60 yc = 30.125 Sym. Dimensio! Height, A1 (SFF-8201) Width, A4; max A4 + A5…

View full datasheet →