* CC-SLOTCOVER-DS-slot10-45 revA 0 CommunityCAD Size datasheet - slot10-45
45 slot 10 extrusion slot cover
Size datasheet: this size's values with their levels, conventions and sources.
For 45 slot 10 aluminium extrusion slots
Part keys extrusion - slot-covers- slot10-45x100 ... (one per stock length)
Files 14 STEP AP214 (simplified), one per slot10-45, end view, 1.5:1 stock length Sym. Dimension Value Level b Face width 10 Lia - 2 b1 Widest point, across the feet 11* lo -4 h Depth 13 L1- 2 t Face thickness 0.7* lo -4 b2 Open-side gap 5.6% lo- 41
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' drawings) Page 1/2 Extrusion slot cover - slot10-45 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 1195d6e9533baé6db9eb2f578cae540746ef8dbb2
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-SLOTCOVER-DS-slot10-45 revA Size datasheet - slot10-45
'?) CommunityCAD
Lengths | Thread Part key
100 built - - extrusion-slot-covers-slot10-45x100 150 built - - extrusion-slot-covers-slot10-45x150 200 built - - extrusion-slot-covers-slot10-45x200 250 built - - extrusion-slot-covers-slot10-45x250 300 built - - extrusion-slot-covers-slot10-45x300 350 built = - extrusion-slot-covers-slot10-45x350 400 built - - extrusion-slot-covers-slot10-45x400 450 built - - extrusion-slot-covers-slot10-45x450 500 built - - extrusion-slot-covers-slot10-45x500 600 built - - extrusion-slot-covers-slot10-45x600 750 built - - extrusion-slot-covers-slot10-45x750 1000 built - - extrusion-slot-covers-slot10-45x1000 1500 built - - extrusion-slot-covers-slot10-45x1500
2000 built - - extrusion-slot-covers-slot10-45x2000
One STEP file per stock length.
Conventions
« Legs and feet: Two legs one wall t thick under the face, which overhangs each leg by one wall; at the bottom of each leg a foot steps out at 45° to the widest point b1 (the catch under the slot lips), then straight down to the depth h; its inside at b2 / 2 where a drawing gives the open-side gap b2, else in line with the leg. The legs' shape (wall thickness where no drawing gives it, feet, bumps, corner rounds) is illustrative, after each size's reference drawing, not any maker's design; face width, widest point and depth from the makers' drawings (ADR 0101, #1042 item 4).
« Wall thickness: t where the reference drawing gives it; where it doesn't (40 I-type slot 8: item and KIPP draw none), t = b/ 10.
e Bumps and rounds: Round bumps of radius t/2 on each leg's outside, as many as the reference drawing shows, equally spaced; R t/2 on the face's outer corners and the feet's outer bottom corners; every other edge sharp.
« Values: No published standard: b, b1 and h from two or more makers' drawings, the largest any maker states where they differ, so the model covers every maker's cover; t and b2 the reference maker's. 20 B-type slot 6 is Misumi HSCAS5 alone.
« Ends, lengths, finish: Flat square- cut ends; the stock lengths as file options (length tolerance not modeled); no markings; matte black plastic, render and metadata only. Face out is the cover use; reversed, the same strip holds a panel.
Sources
Source Publisher Retrieved sha256
misumi-slot-covers MISUMI 2026-10-29 7a929bce3181 (kept outside the repo) kipp-k1054 KIPP (copy hosted by Marek) 2026-10-29 8c8a15F955d3
The whole series (verification map, corrections, drawings): CC- SLOTCOVER-DS.
No published standard (makers' drawings) Page 2/2 Extrusion slot cover - slot10-45 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 1195d6e9533baé6db9eb2f578cae540746ef8dbb2
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.