M6 Large Flat Washer (Fender Washer), DIN 9021
Made for M6 screws, this large flat washer (DIN 9021) has a 6.4 mm hole and is 18 mm across, 1.6 mm thick. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: M6 washer
- Model id:
din9021-m6
- Standard: DIN 9021:1990 · size M6
Files
| Part key | Simplified |
|---|
din9021-m6 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | | 6.4 | 6.62 | 6.4 | nominal | L1 |
| d2 | Outside diameter | 17.57 | 18 | | 18 | nominal | L1 |
| h | Thickness | 1.4 | 1.6 | 1.8 | 1.6 | nominal | L1 |
Drawing

As a PDF: CC-DIN9021-SZ-M6.pdf.
Goes with the M6 large flat washer
The M6 large flat washer beside the M5 and the M8
The M6 is number 5, counting from the smallest, of the 6 DIN 9021 large flat washers published here, from M2.5 to M8.
- Inside diameter (d1): 6.4 mm on the M6 large flat washer, against 5.3 mm on the M5 and 8.4 mm on the M8.
- Outside diameter (d2): 18 mm on the M6 large flat washer, against 15 mm on the M5 and 24 mm on the M8.
- Thickness (h): 1.6 mm on the M6 large flat washer, against 1.2 mm on the M5 and 2 mm on the M8.
Other sizes
Documents
Sources
fasten-it-din9021, fasteners-eu-din9021, jcfasteners-din9021. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.