M4 Large Flat Washer (Fender Washer), DIN 9021
Made for M4 screws, this large flat washer (DIN 9021) has a 4.3 mm hole and is 12 mm across, 1 mm thick. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: M4 washer
- Model id:
din9021-m4
- Standard: DIN 9021:1990 · size M4
Files
| Part key | Simplified |
|---|
din9021-m4 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | | 4.3 | 4.48 | 4.3 | nominal | L1 |
| d2 | Outside diameter | 11.57 | 12 | | 12 | nominal | L1 |
| h | Thickness | 0.9 | 1 | 1.1 | 1 | nominal | L1 |
Drawing

As a PDF: CC-DIN9021-SZ-M4.pdf.
Goes with the M4 large flat washer
The M4 large flat washer beside the M3 and the M5
The M4 is number 3, counting from the smallest, of the 6 DIN 9021 large flat washers published here, from M2.5 to M8.
- Inside diameter (d1): 4.3 mm on the M4 large flat washer, against 3.2 mm on the M3 and 5.3 mm on the M5.
- Outside diameter (d2): 12 mm on the M4 large flat washer, against 9 mm on the M3 and 15 mm on the M5.
- Thickness (h): 1 mm on the M4 large flat washer, against 0.8 mm on the M3 and 1.2 mm on the M5.
Other sizes
Documents
Sources
fasten-it-din9021, fasteners-eu-din9021, jcfasteners-din9021. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.