M5 Small Flat Washer (Small Plain Washer), ISO 7092

STEP · STL Supports CommunityCAD0 downloads
M5 Small Flat Washer (Small Plain Washer), ISO 7092
1 / 4

M5 Small Flat Washer (Small Plain Washer), ISO 7092

Made for M5 screws, this small flat washer (ISO 7092) has a 5.3 mm hole and is 9 mm across, 1 mm thick. Download it as simplified STEP files.

M5 small flat washer, ISO 7092

How these parts are made, and what the levels mean: read the method

  • Also searched as: M5 washer
  • Model id: iso7092-m5
  • Standard: ISO 7092:2000 · size M5

Files

Part keySimplified
iso7092-m5STEP

Dimensions

Dimension symbols for M5 small flat washers (ISO 7092)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter5.35.35.485.3nominalL2
d2Outside diameter8.64999nominalL2
hThickness0.911.11nominalL2

Drawing

Drawing of the M5 small flat washer with its values (ISO 7092)

As a PDF: CC-ISO7092-SZ-M5.pdf.

Goes with the M5 small flat washer

The M5 small flat washer beside the M4 and the M6

The M5 is number 5, counting from the smallest, of the 7 ISO 7092 small flat washers published here, from M2 to M8.

  • Inside diameter (d1): 5.3 mm on the M5 small flat washer, against 4.3 mm on the M4 and 6.4 mm on the M6.
  • Outside diameter (d2): 9 mm on the M5 small flat washer, against 8 mm on the M4 and 11 mm on the M6.
  • Thickness (h): 1 mm on the M5 small flat washer, against 0.5 mm on the M4 and 1.6 mm on the M6.

Other sizes

Documents

Sources

amesweb-iso7092, fasten-it-iso7092, fasteners-eu-iso7092, iso7092-2000-sample. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO7092-SZ-M5.pdf

ISO 7092 plain washer, small series, grade A, M5 Size drawing - M5 values on the views - enlarged 10:1 Dimension 5.30 5.30-5.48 Hole diameter (nom = min) 9.00 8.64-9.00 Outside diameter (nom = max) 1 Thickness Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey…

View full datasheet →

docs/CC-ISO7092-DS-M5.pdf

. CC-1S07092-DS-M5 revA '?) CommunityCAD Size datasheet - M5 ISO 7092 M5 plain washer, small series Size datasheet: this size's values with their levels, conventions and sources. For M5 bolts and screws Part key iso7092-m5 | Files 1 STEP AP214 (simplified) M5, front view, 4:1 MS, view from above,…

View full datasheet →