M3 Small Flat Washer (Small Plain Washer), ISO 7092
Made for M3 screws, this small flat washer (ISO 7092) has a 3.2 mm hole and is 6 mm across, 0.5 mm thick. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: M3 washer
- Model id:
iso7092-m3
- Standard: ISO 7092:2000 · size M3
Files
| Part key | Simplified |
|---|
iso7092-m3 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | 3.2 | 3.2 | 3.38 | 3.2 | nominal | L2 |
| d2 | Outside diameter | 5.7 | 6 | 6 | 6 | nominal | L2 |
| h | Thickness | 0.45 | 0.5 | 0.55 | 0.5 | nominal | L2 |
Drawing

As a PDF: CC-ISO7092-SZ-M3.pdf.
Goes with the M3 small flat washer
The M3 small flat washer beside the M2.5 and the M4
The M3 is number 3, counting from the smallest, of the 7 ISO 7092 small flat washers published here, from M2 to M8.
- Inside diameter (d1): 3.2 mm on the M3 small flat washer, against 2.7 mm on the M2.5 and 4.3 mm on the M4.
- Outside diameter (d2): 6 mm on the M3 small flat washer, against 5 mm on the M2.5 and 8 mm on the M4.
- Thickness (h): 0.5 mm on the M3 small flat washer, the same on the M2.5 and the M4.
Other sizes
Documents
Sources
amesweb-iso7092, fasten-it-iso7092, fasteners-eu-iso7092, iso7092-2000-sample. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.