ISO 4035 hexagon thin nut (style 0), M2
Size drawing - M2 values on the views - enlarged 10:1
Sym. Dimensi
Thread pitch 8-4
3.91 3.82-4.00
Width across flats
2 4.32 Width across corners
1.075 0.95-1.20
Nut height
> Wrenching height 2 6.88
=h0 0.95-1.20 6 = 115° 0°-120° . , 3.10 s= 3.91 Bearing face diameter 3.82-4.00
2.15 2.00-2.30
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
j Countersink angle, deg 115
e2 4.32 110-120
. 1 View from above Basic minor diameter (crests) 1.567
tap Tap drill (method D - P) 7.6
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 10 - L16.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014).
e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face: ISO 4035 has no washer face form, so there is no c (ADR 0040 row 5).
TITLE
'? CommunityCAD Size drawing, M2
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4035:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M2
SHEET REV SCALE PROJECTION UNITS CC-1S04035-SZ-M2 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 82d0e3F1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.