M2 Thin Hex Nut (Jam Nut), ISO 4035

Across the flats an M2 thin hex nut (ISO 4035) measures 3.82 to 4 mm, and it stands 0.95 to 1.2 mm tall on the M2 × 0.4 thread. It comes as simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: M2 nut
• Model id: iso4035-m2
• Standard: ISO 4035:2012 · thread M2 × 0.4, ISO metric coarse, right hand

Files

Part key	Simplified	Threaded
iso4035-m2	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
P	Thread pitch		0.4		0.4	nominal	L2
da	Countersink diameter	2		2.3	2.15	midpoint of min–max	L2
dw	Bearing face diameter	3.1			3.1	single limit (min), modeled at the limit	L2
e	Width across corners	4.32			4.32	single limit (min), modeled at the limit	L2
m	Nut height	0.95		1.2	1.075	midpoint of min–max	L2
mw	Wrenching height	0.8			0.8	single limit (min), modeled at the limit	L2
s	Width across flats	3.82		4	3.91	midpoint of min–max	L2
beta	Chamfer angle	15		30	22.5	midpoint of min–max	L2
theta	Countersink angle	110		120	115	midpoint of min–max	L2
P	Coarse thread pitch		0.4		0.4	nominal	L1
tap_drill	Tap drill diameter		1.6		1.6	nominal	L1
d1	Basic minor diameter		1.5669872		1.5669872	nominal	L1
ch_angle	Chamfered end angle			50	50	single limit (max), modeled at the limit	L2
dh_fine	Clearance hole, fine series		2.2		2.2	nominal	L1
dh_medium	Clearance hole, medium series		2.4		2.4	nominal	L1
dh_coarse	Clearance hole, coarse series		2.6		2.6	nominal	L1

Thread and holes

• Tap drill: 1.6 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
• Clearance hole (ISO 273): close 2.2, normal 2.4, loose 2.6 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

As a PDF: CC-ISO4035-SZ-M2.pdf.

Goes with the M2 thin hex nut

• Spanner: 4 mm, the hexagon's maximum width across flats (s) in the table above.
• ISO 4762 socket head cap screw in 9 lengths from 3 to 20 mm, the same size as this M2 thin hex nut: M2 Socket Head Cap Screw (Allen Bolt), ISO 4762 / DIN 912
• ISO 4017 hex head screw in 8 lengths from 4 to 20 mm, the same size as this M2 thin hex nut: M2 Hex Head Screw (Hex Bolt), ISO 4017
• ISO 7089 flat washer, the same size as this M2 thin hex nut: M2 Flat Washer (Plain Washer), ISO 7089

The M2 thin hex nut beside the M2.5

The M2 is the smallest of the 7 ISO 4035 thin hex nuts published here, from M2 to M8.

• Thread pitch (P): 0.4 mm on the M2 thin hex nut, against 0.45 mm on the M2.5.
• Countersink diameter (da): 2 to 2.3 mm on the M2 thin hex nut, against 2.5 to 2.9 mm on the M2.5.
• Bearing face diameter (dw): at least 3.1 mm on the M2 thin hex nut, against at least 4.1 mm on the M2.5.
• Width across corners (e): at least 4.32 mm on the M2 thin hex nut, against at least 5.45 mm on the M2.5.
• Nut height (m): 0.95 to 1.2 mm on the M2 thin hex nut, against 1.35 to 1.6 mm on the M2.5.
• Wrenching height (mw): at least 0.8 mm on the M2 thin hex nut, against at least 1.1 mm on the M2.5.
• Width across flats (s): 3.82 to 4 mm on the M2 thin hex nut, against 4.82 to 5 mm on the M2.5.
• Chamfer angle (beta): 15 to 30° on the M2 thin hex nut, the same on the M2.5.

Other sizes

• One size larger: M2.5 Thin Hex Nut (Jam Nut), ISO 4035, 4.82 to 5 mm across flats.

Documents

• CC-ISO4035-DS-M2.pdf: M2 datasheet: values with levels, sources
• CC-ISO4035-SZ-M2.pdf: M2 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

albany-clearance, amesweb-tap-drill, boltport-iso4035, engineersedge-iso4035, fasten-it-iso4035, fuller-iso4035, iso4035-2012-sample, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.