m0.8-z30 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m0.8-z30 Spur Gear, Spur gear
1 / 7

m0.8-z30 Spur Gear, Spur gear

The m0.8-z30 spur gear: reference (pitch) diameter 24 mm, tip (outside) diameter 25.6 mm, root diameter 22 mm. Available as simplified STEP files.

m0.8-z30 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m0.8-z30 metric spur gear, m0.8-z30 involute gear, m0.8-z30 straight cut gear, m0.8-z30 pinion
  • Model id: spur-gears-m0-8-z30
  • Standard: Spur gear · size m0.8-z30

Files

Part keySimplified
spur-gears-m0-8-z30STEP

Dimensions

Dimension symbols for m0.8-z30 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter2424nominalL2
daTip (outside) diameter25.625.6nominalL2
dfRoot diameter2222nominalL0 (nom: one source)
dsBore diameter55nominalL2
dhHub diameter2020nominalL2
bFace width88nominalL2
lhHub width88nominalL2
dh_hpcHPC's hub (boss) diameter1616nominalL0 (nom: one source)
ds_hpcHPC's bore66nominalL0 (nom: one source)
LTotal length1616nominalL2

Drawing

Drawing of the m0.8-z30 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m0.8-z30.pdf.

The m0.8-z30 spur gear beside the m0.8-z25 and the m0.8-z40

The m0.8-z30 is number 10 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 24 mm on the m0.8-z30 spur gear, against 20 mm on the m0.8-z25 and 32 mm on the m0.8-z40.
  • Tip (outside) diameter (da): 25.6 mm on the m0.8-z30 spur gear, against 21.6 mm on the m0.8-z25 and 33.6 mm on the m0.8-z40.
  • Root diameter (df): 22 mm on the m0.8-z30 spur gear, against 18 mm on the m0.8-z25 and 30 mm on the m0.8-z40.
  • Bore diameter (ds): 5 mm on the m0.8-z30 spur gear, against 5 mm on the m0.8-z25 and 6 mm on the m0.8-z40.
  • Hub diameter (dh): 20 mm on the m0.8-z30 spur gear, against 16 mm on the m0.8-z25 and 28 mm on the m0.8-z40.
  • Face width (b): 8 mm on the m0.8-z30 spur gear, the same on the m0.8-z25 and the m0.8-z40.
  • Hub width (lh): 8 mm on the m0.8-z30 spur gear, the same on the m0.8-z25 and the m0.8-z40.
  • HPC's hub (boss) diameter (dh_hpc): 16 mm on the m0.8-z30 spur gear, against 12 mm on the m0.8-z25 and 16 mm on the m0.8-z40.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m0-8-z30.pdf

'?) CommunityCAD CC-SPUR-DS-m0-8-z30 revA Size datasheet - m0.8-z30 Module 0.8, 30 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. m0.8-z30, end, 0.75:1 da df ds dh Th dhH dsH ha hf c p Dimension Reference (pitch) diameter Tip (outside) diameter Root…

View full datasheet →

docs/CC-SPUR-SZ-m0.8-z30.pdf

Involute spur gear, ISO 53 basic rack, m0.8-z30 Size drawing - m0.8-z30 values on the views - enlarged 4:1 @d = 24.00 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC…

View full datasheet →