HK2526 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
HK2526 Needle Bearing, ISO 3245
1 / 5

HK2526 Needle Bearing, ISO 3245

The HK2526 needle bearing (ISO 3245) has a 25 mm bore, a 32 mm outside diameter and a width of 26 mm. Get it as simplified STEP files.

HK2526 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: HK2526 drawn cup needle roller bearing, HK2526 needle roller bearing, HK2526 drawn cup bearing
  • Model id: iso3245-hk2526
  • Standard: ISO 3245 · size HK2526

Files

Part keySimplified
iso3245-hk2526STEP

Dimensions

Dimension symbols for HK2526 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers2525nominalL1
DOutside diameter3232nominalL1
CWidth2626nominalL1
rChamfer dimension0.80.8single limit (min), modeled at the limitL1

Drawing

Drawing of the HK2526 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-SZ-HK2526.pdf.

The HK2526 needle bearing beside the HK2520

The HK2526 is the last of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.

  • Bore diameter under the rollers (Fw): 25 mm on the HK2526 needle bearing, the same on the HK2520.
  • Outside diameter (D): 32 mm on the HK2526 needle bearing, the same on the HK2520.
  • Width (C): 26 mm on the HK2526 needle bearing, against 20 mm on the HK2520.
  • Chamfer dimension (r): at least 0.8 mm on the HK2526 needle bearing, the same on the HK2520.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-hk, ntn-bearingfinder-hk, schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-DS-HK2526.pdf

* CC-1S803245-DS-HK2526 revA '?) CommunityCAD Size datasheet - HK2526 ISO 3245 HK2526 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 25 mm shafts running directly on the rollers q i H Part key iso3245-hk2526 Huw Files 1 STEP…

View full datasheet →

docs/CC-ISO3245-SZ-HK2526.pdf

ISO 3245 drawn cup needle roller bearing, open ends (HK), HK2526 Size drawing - HK2526 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1 Bearing HK2526 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →