HK1816 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
HK1816 Needle Bearing, ISO 3245
1 / 5

HK1816 Needle Bearing, ISO 3245

The HK1816 needle bearing (ISO 3245) has an 18 mm bore, a 24 mm outside diameter and a width of 16 mm. Get it as simplified STEP files.

HK1816 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: HK1816 drawn cup needle roller bearing, HK1816 needle roller bearing, HK1816 drawn cup bearing
  • Model id: iso3245-hk1816
  • Standard: ISO 3245 · size HK1816

Files

Part keySimplified
iso3245-hk1816STEP

Dimensions

Dimension symbols for HK1816 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers1818nominalL1
DOutside diameter2424nominalL1
CWidth1616nominalL1
rChamfer dimension0.80.8single limit (min), modeled at the limitL1

Drawing

Drawing of the HK1816 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-SZ-HK1816.pdf.

The HK1816 needle bearing beside the HK1812 and the HK2010

The HK1816 is number 25 of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.

  • Bore diameter under the rollers (Fw): 18 mm on the HK1816 needle bearing, against 18 mm on the HK1812 and 20 mm on the HK2010.
  • Outside diameter (D): 24 mm on the HK1816 needle bearing, against 24 mm on the HK1812 and 26 mm on the HK2010.
  • Width (C): 16 mm on the HK1816 needle bearing, against 12 mm on the HK1812 and 10 mm on the HK2010.
  • Chamfer dimension (r): at least 0.8 mm on the HK1816 needle bearing, the same on the HK1812 and the HK2010.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-hk, ntn-bearingfinder-hk, schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-DS-HK1816.pdf

* CC-1S803245-DS-HK1816 rev A '?) CommunityCAD Size datasheet - HK1816 ISO 3245 HK1816 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 18 mm shafts running directly on the rollers Part key iso3245-hk1816 Files 1 STEP AP214…

View full datasheet →

docs/CC-ISO3245-SZ-HK1816.pdf

ISO 3245 drawn cup needle roller bearing, open ends (HK), HK1816 Size drawing - HK1816 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1 Bearing HK1816 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →