HK1015 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245

For a 10 mm shaft and a 14 mm housing bore, the HK1015 needle bearing (ISO 3245) is 15 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: HK1015 bearing
• Model id: iso3245-hk1015
• Standard: ISO 3245 · size HK1015

Files

Part key	Simplified
iso3245-hk1015	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
Fw	Bore diameter under the rollers		10		10	nominal	L1
D	Outside diameter		14		14	nominal	L1
C	Width		15		15	nominal	L1
r	Chamfer dimension	0.4			0.4	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-ISO3245-SZ-HK1015.pdf.

The HK1015 needle bearing beside the HK1012 and the HK1210

The HK1015 is number 14 of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.

• Bore diameter under the rollers (Fw): 10 mm on the HK1015 needle bearing, against 10 mm on the HK1012 and 12 mm on the HK1210.
• Outside diameter (D): 14 mm on the HK1015 needle bearing, against 14 mm on the HK1012 and 16 mm on the HK1210.
• Width (C): 15 mm on the HK1015 needle bearing, against 12 mm on the HK1012 and 10 mm on the HK1210.
• Chamfer dimension (r): at least 0.4 mm on the HK1015 needle bearing, the same on the HK1012 and the HK1210.

Other sizes

• One size smaller: HK1012 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245, 10 mm bore, 14 mm OD, 12 mm wide.
• One size larger: HK1210 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245, 12 mm bore, 16 mm OD, 10 mm wide.

Documents

• CC-ISO3245-DS-HK1015.pdf: HK1015 datasheet: values with levels, sources
• CC-ISO3245-SZ-HK1015.pdf: HK1015 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

koyo-bs007-hk, ntn-bearingfinder-hk, schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.