HK2010 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245

For a 20 mm shaft and a 26 mm housing bore, the HK2010 needle bearing (ISO 3245) is 10 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: HK2010 bearing
• Model id: iso3245-hk2010
• Standard: ISO 3245 · size HK2010

Files

Part key	Simplified
iso3245-hk2010	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
Fw	Bore diameter under the rollers		20		20	nominal	L1
D	Outside diameter		26		26	nominal	L1
C	Width		10		10	nominal	L1
r	Chamfer dimension	0.8			0.8	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-ISO3245-SZ-HK2010.pdf.

The HK2010 needle bearing beside the HK1816 and the HK2012

The HK2010 is number 26 of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.

• Bore diameter under the rollers (Fw): 20 mm on the HK2010 needle bearing, against 18 mm on the HK1816 and 20 mm on the HK2012.
• Outside diameter (D): 26 mm on the HK2010 needle bearing, against 24 mm on the HK1816 and 26 mm on the HK2012.
• Width (C): 10 mm on the HK2010 needle bearing, against 16 mm on the HK1816 and 12 mm on the HK2012.
• Chamfer dimension (r): at least 0.8 mm on the HK2010 needle bearing, the same on the HK1816 and the HK2012.

Other sizes

• One size smaller: HK1816 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245, 18 mm bore, 24 mm OD, 16 mm wide.
• One size larger: HK2012 Needle Bearing (Drawn Cup Needle Roller Bearing), ISO 3245, 20 mm bore, 26 mm OD, 12 mm wide.

Documents

• CC-ISO3245-DS-HK2010.pdf: HK2010 datasheet: values with levels, sources
• CC-ISO3245-SZ-HK2010.pdf: HK2010 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.