F686 Flanged Ball Bearing

STL Supports CommunityCAD0 downloads
F686 Flanged Ball Bearing
1 / 5

F686 Flanged Ball Bearing

The F686 flanged ball bearing (F and MF series) has a 6 mm bore, a 13 mm outside diameter and a width of 3.5 mm. Get it as simplified STEP files. Its flange is 15 mm across and 1 mm thick.

F686 flanged ball bearing, F and MF series

How these parts are made, and what the levels mean: read the method

  • Also known as: F686 flange bearing, F686 MF bearing, F686 F bearing, F686 flanged miniature bearing
  • Model id: bearings-miniature-flanged-f686
  • Standard: F and MF series · size F686

Files

Part keySimplified
bearings-miniature-flanged-f686STEP

Dimensions

Dimension symbols for F686 flanged ball bearings (F and MF series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter66nominalL1
DOutside diameter1313nominalL1
BWidth3.53.5nominalL1
rChamfer dimension0.150.15single limit (min), modeled at the limitL1
D1Flange diameter1515nominalL1
C1Flange width11nominalL1

Drawing

Drawing of the F686 flanged ball bearing with its values (F and MF series)

As a PDF: CC-BRG-MINI-FL-SZ-F686.pdf.

The F686 flanged ball bearing beside the MF126 and the F696

The F686 is number 25 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.

  • Bore diameter (d): 6 mm on the F686 flanged ball bearing, the same on the MF126 and the F696.
  • Outside diameter (D): 13 mm on the F686 flanged ball bearing, against 12 mm on the MF126 and 15 mm on the F696.
  • Width (B): 3.5 mm on the F686 flanged ball bearing, against 3 mm on the MF126 and 5 mm on the F696.
  • Chamfer dimension (r): at least 0.15 mm on the F686 flanged ball bearing, against at least 0.15 mm on the MF126 and at least 0.2 mm on the F696.
  • Flange diameter (D1): 15 mm on the F686 flanged ball bearing, against 13.2 mm on the MF126 and 17 mm on the F696.
  • Flange width (C1): 1 mm on the F686 flanged ball bearing, against 0.6 mm on the MF126 and 1.2 mm on the F696.

The F686 flanged ball bearing in its other versions

Other sizes

Conventions

  • Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature-flanged, nsk-miniature-flanged, ntn-bearingfinder-miniature-flanged. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-FL-DS-F686.pdf

CC-BRG-MINI-FL-DS-F686 rev A Size datasheet - F686 '?) CommunityCAD F and MF series F686 flanged miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 6 mm shafts Part keys bearings - miniature - flanged- £686,…

View full datasheet →

docs/CC-BRG-MINI-FL-SZ-F686.pdf

Flanged miniature deep groove ball bearing, F and MF series, F686 Size drawing - F686 values on the views - F686ZZ shown. Built from: open F686 - 2Z F686ZZ - enlarged 5:1 Bearing F686 13.000 15.000 F686ZZ 13.000 15.000 Source levels d = 6.000 Main value = the modeled value (nominal, else the…

View full datasheet →