F635 Flanged Ball Bearing

STL Supports CommunityCAD0 downloads
F635 Flanged Ball Bearing
1 / 5

F635 Flanged Ball Bearing

For a 5 mm shaft and a 19 mm housing bore, the F635 flanged ball bearing (F and MF series) is 6 mm wide. Modeled as simplified STEP files. Its flange is 22 mm across and 1.5 mm thick.

F635 flanged ball bearing, F and MF series

How these parts are made, and what the levels mean: read the method

  • Also known as: F635 flange bearing, F635 MF bearing, F635 F bearing, F635 flanged miniature bearing
  • Model id: bearings-miniature-flanged-f635
  • Standard: F and MF series · size F635

Files

Part keySimplified
bearings-miniature-flanged-f635STEP

Dimensions

Dimension symbols for F635 flanged ball bearings (F and MF series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter55nominalL1
DOutside diameter1919nominalL1
BWidth66nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1
D1Flange diameter2222nominalL1
C1Flange width1.51.5nominalL1

Drawing

Drawing of the F635 flanged ball bearing with its values (F and MF series)

As a PDF: CC-BRG-MINI-FL-SZ-F635.pdf.

The F635 flanged ball bearing beside the F625 and the MF106

The F635 is number 22 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.

  • Bore diameter (d): 5 mm on the F635 flanged ball bearing, against 5 mm on the F625 and 6 mm on the MF106.
  • Outside diameter (D): 19 mm on the F635 flanged ball bearing, against 16 mm on the F625 and 10 mm on the MF106.
  • Width (B): 6 mm on the F635 flanged ball bearing, against 5 mm on the F625 and 2.5 mm on the MF106.
  • Chamfer dimension (r): at least 0.3 mm on the F635 flanged ball bearing, against at least 0.3 mm on the F625 and at least 0.1 mm on the MF106.
  • Flange diameter (D1): 22 mm on the F635 flanged ball bearing, against 18 mm on the F625 and 11.2 mm on the MF106.
  • Flange width (C1): 1.5 mm on the F635 flanged ball bearing, against 1 mm on the F625 and 0.6 mm on the MF106.

The F635 flanged ball bearing in its other versions

Other sizes

Conventions

  • Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature-flanged, nsk-miniature-flanged. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-FL-DS-F635.pdf

* CC-BRG-MINI-FL-DS-F635 revA '?) CommunityCAD Size datasheet - F635 F and MF series F635 flanged miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 5 mm shafts Part keys bearings - miniature - flanged- £635,…

View full datasheet →

docs/CC-BRG-MINI-FL-SZ-F635.pdf

Flanged miniature deep groove ball bearing, F and MF series, F635 Size drawing - F635 values on the views - F635ZZ shown. Built from: open F635 - 2Z F635ZZ - enlarged 5:1 Bearing F635 19.000 22.000 F635ZZ 19.000 22.000 Source levels : Main value = the modeled value (nominal, else the middle of…

View full datasheet →