IEC 60320 power inlet, per maker part number, schurter-6100-3
Size drawing - schurter-6100-3 values on the views - scale 1:1
dh = 3.5, dk = 6.3, ak = 90°
° a
cw = 28
Panel cutout, front mounting (the maker's reference, not modeled)
—
rw = 28.5
Panel cutout, rear mounting (the maker's reference, not modeled)
Sym.
wt hf wa ha ef es p
dh dk ak wb hb Es Eq cw ch cr cp cd cm rw rh rr rp rd
rm
Dimensi
Flange width
Flange height
Front face width
Front face height
Front height
Front face projection Mounting hole pitch Mounting hole diameter Countersink diameter Countersink angle
Body width
Body height
Terminal length, solder Terminal length, quick connect Cutout width, front mounting Cutout height, front mounting Cutout corner radius
Cutout hole pitch
Cutout hole diameter
Cutout hole thread
Cutout width, rear mounting Cutout height, rear mounting Rear cutout corner radius Rear cutout hole pitch
Rear cutout hole diameter Rear cutout hole thread
Panel thickness, greatest
'? CommunityCAD
TITLE
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c =a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 27.
Notes
A dash: that maker's drawing doesn't state it.
Panel cutouts and thicknesses: the maker's reference, not modeled.
Coupler face, pins, latches, rocker and drawer illustrative: sheet DO2.
Size drawing, schurter-6100-3
STANDARDS FOLLOWED No published standard: each maker's own drawing
FAMILY / DETAIL IEC 60320 power inlet - schurter-6100-3
SHEET
CC-IECINLET-SZ-schurter-6100-3| A 1:1
REV SCALE
PROJECTION UNITS
Dimensions in mm
SPEC VERSION
LICENSE
PAGE
3¢4229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
