CC-IECINLET-DS-schurter-6100-3 revA Size datasheet - schurter-6100-3
'?) CommunityCAD
Schurter 6100-3 C14 power inlet
Size datasheet: this size's values with their levels, conventions and sources.
For panel mounting: takes a C13 cord
Part key iec-inlets-schurter-6100-3
Files 1 STEP AP214 (simplified)
schurter-6100-3, front, 0.75:1 schurter-6100-3, side, 0.75:1 (hidden lines dashed) Sym. Dimension Value wt Flange width 48 hf Flange height 23 wa Front face width 28 ha Front face height 20.5 ef Front height 5 es Front face projection A258 p Mounting hole pitch 40 dh Mounting hole diameter 38 dk Countersink diameter 6.3 ak Countersink angle 90 wb Body width 27.5 hb Body height 19.5 Es Terminal length, solder 20.5 Eq Terminal length, quick connect 2805 cw Cutout width, front mounting 28 ch Cutout height, front mounting 20 er Cutout corner radius <3 cp Cutout hole pitch 40
Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard: each maker's own drawing Page 1/2 IEC 60320 power inlet - schurter-6100-3 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-IECINLET-DS-schurter-6100-3 revA 0 CommunityCAD Size datasheet - schurter-6100-3
Dimensions (continued)
Sym. Dimension Value Level cd Cutout hole diameter 3.5 L2-1
cm Cutout hole thread 3 rw Cutout width, rear mounting 28.5 rh Cutout height, rear mounting 21 pet er Rear cutout corner radius <3 rp Rear cutout hole pitch 40 rd Rear cutout hole diameter 3.5 rm Rear cutout hole thread 3 pet smax Panel thickness, greatest <8 ptt |
Conventions
« Each part its maker's drawing: No published standard for the body, flange, holes or panel cutout: every value is that part's maker drawing (L2, one lineage), CommunityCAD's model of it, not a Schurter or Qualtek file. IEC 60320-3 fixes only the coupler face and is paid.
« Panel cutouts are reference data: The panel cutout (front mounting, and rear mounting where the maker draws one) and panel thickness are the maker's own, on this page as reference; they are not modeled and aren't a shared "C14 cutout".
« Frame: The flange's back face (the panel's front face) at z = 0, the front face toward +Z, the body toward -Z, the mounting holes on X; the C14's earth pin toward +Y (DD11: toward +X, as Schurter draws it).
« Coupler opening and pins: Illustrative: the coupler opening's shape and depth and its pins (Qualtek's opening size where given), the flange outline between the drawn extents, the body's depth where only E is given, DD11's countersink diameter, rocker and fuse drawer, 6100-4's latches, the corner rounds and the terminal tabs.
« Terminals: Schurter's quick-connect variant (Eq) is modeled; its solder variant (Es) is recorded. Qualtek's solder pins as its drawing shows them.
Sources Source Publisher Retrieved sha256 schurter-6100-3 SCHURTER AG 2026-11-07 790ed148c975 (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-IECINLET-DS.
No published standard: each maker's own drawing Page 2/2 IEC 60320 power inlet - schurter-6100-3 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
