3x6 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

Pressed into a 6 mm housing bore, the 3x6 sintered bronze bushing (ISO 2795) carries a 3 mm shaft on its oil-filled wall. It comes in 2 lengths from 3 to 4 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 3x6 bushing, 3x6 x 3 to 3x6 x 4 bushings
• Model id: iso2795-c-3x6
• Standard: ISO 2795:2020 · size 3x6

Lengths

Length (mm)	Part key	Simplified
3	iso2795-c-3x6x3	STEP
4	iso2795-c-3x6x4	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d	Inside diameter		3		3	nominal	L2
D	Outside diameter		6		6	nominal	L2
C	Chamfer, maximum			0.3	0.3	single limit (max), modeled at the limit	L2
C_angle	Chamfer angle		45		45	nominal	L1

Drawing

As a PDF: CC-ISO2795-SZ-3x6.pdf.

The 3x6 sintered bronze bushing beside the 2.5x6 and the 3x5

The 3x6 is number 3 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.

• Inside diameter (d): 3 mm on the 3x6 sintered bronze bushing, against 2.5 mm on the 2.5x6 and 3 mm on the 3x5.
• Outside diameter (D): 6 mm on the 3x6 sintered bronze bushing, against 6 mm on the 2.5x6 and 5 mm on the 3x5.
• Chamfer, maximum (C): up to 0.3 mm on the 3x6 sintered bronze bushing, against up to 0.3 mm on the 2.5x6 and up to 0.2 mm on the 3x5.
• Chamfer angle (C_angle): 45° on the 3x6 sintered bronze bushing, the same on the 2.5x6 and the 3x5.

Other sizes

• One size smaller: 2.5x6 Sintered Bronze Bushing (Oilite Bushing), ISO 2795, 2.5 mm bore, 6 mm OD.
• One size larger: 3x5 Sintered Bronze Bushing (Oilite Bushing), ISO 2795, 3 mm bore, 5 mm OD.

Documents

• CC-ISO2795-DS-3x6.pdf: 3x6 datasheet: values with levels, lengths, sources
• CC-ISO2795-SZ-3x6.pdf: 3x6 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.