2.5x6 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

For a 2.5 mm shaft in a 6 mm housing bore, this 2.5x6 sintered bronze bushing (ISO 2795) presses in and runs on the oil in its sintered wall. Modeled as 2 lengths from 2 to 3 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 2.5x6 bushing, 2.5x6 x 2 to 2.5x6 x 3 bushings
• Model id: iso2795-c-2-5x6
• Standard: ISO 2795:2020 · size 2.5x6

Lengths

Length (mm)	Part key	Simplified
2	iso2795-c-2-5x6x2	STEP
3	iso2795-c-2-5x6x3	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d	Inside diameter		2.5		2.5	nominal	L2
D	Outside diameter		6		6	nominal	L2
C	Chamfer, maximum			0.3	0.3	single limit (max), modeled at the limit	L2
C_angle	Chamfer angle		45		45	nominal	L1

Drawing

As a PDF: CC-ISO2795-SZ-2.5x6.pdf.

The 2.5x6 sintered bronze bushing beside the 2x5 and the 3x6

The 2.5x6 is number 2 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.

• Inside diameter (d): 2.5 mm on the 2.5x6 sintered bronze bushing, against 2 mm on the 2x5 and 3 mm on the 3x6.
• Outside diameter (D): 6 mm on the 2.5x6 sintered bronze bushing, against 5 mm on the 2x5 and 6 mm on the 3x6.
• Chamfer, maximum (C): up to 0.3 mm on the 2.5x6 sintered bronze bushing, the same on the 2x5 and the 3x6.
• Chamfer angle (C_angle): 45° on the 2.5x6 sintered bronze bushing, the same on the 2x5 and the 3x6.

Other sizes

• One size smaller: 2x5 Sintered Bronze Bushing (Oilite Bushing), ISO 2795, 2 mm bore, 5 mm OD.
• One size larger: 3x6 Sintered Bronze Bushing (Oilite Bushing), ISO 2795, 3 mm bore, 6 mm OD.

Documents

• CC-ISO2795-DS-2.5x6.pdf: 2.5x6 datasheet: values with levels, lengths, sources
• CC-ISO2795-SZ-2.5x6.pdf: 2.5x6 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.