36t-8 Timing Pulley, GT2
The 36t-8 timing pulley (GT2 pulley) has 36 teeth on a 22.92 mm pitch diameter and an 8 mm bore; its flanges are 28.067 mm across and its hub 17.1704 mm, held by M4 set screws. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 36t-8 timing belt pulley, 36t-8 toothed pulley, 36t-8 belt pulley
- Model id:
gt2-pulleys-36t-8
- Standard: GT2 pulley · size 36t-8
Files
| Part key | Simplified |
|---|
gt2-pulleys-36t-8 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| dp | Pitch diameter | | 22.92 | | 22.92 | nominal | L1 |
| da | Outside diameter | | 22.41 | | 22.41 | nominal | L1 |
| df | Flange diameter | | 28.067 | | 28.067 | nominal | L1 |
| b | Face width between the flanges | | 7.366 | | 7.366 | nominal | L1 |
| bf | Width over the flanges | | 10.3 | | 10.3 | nominal | L0 (nom: one source) |
| L | Overall length | | 18 | | 18 | nominal | L1 |
| dh | Hub diameter | | 17.1704 | | 17.1704 | nominal | L1 |
| lh | Hub length | | 7.5692 | | 7.5692 | nominal | L0 (nom: one source) |
| de | Face diameter inside the flanges | | 18 | | 18 | nominal | L0 (nom: one source) |
| ds | Set screw thread | | 4 | | 4 | nominal | L1 |
Drawing

As a PDF: CC-GT2-SZ-36t-8.pdf.
The 36t-8 timing pulley beside the 36t-5 and the 40t-5
The 36t-8 is number 4 of the 7 GT2 pulley timing pulleys published here, listed from 16t-5 to 60t-8.
- Pitch diameter (dp): 22.92 mm on the 36t-8 timing pulley, against 22.92 mm on the 36t-5 and 25.46 mm on the 40t-5.
- Outside diameter (da): 22.41 mm on the 36t-8 timing pulley, against 22.41 mm on the 36t-5 and 24.96 mm on the 40t-5.
- Flange diameter (df): 28.067 mm on the 36t-8 timing pulley, against 28.067 mm on the 36t-5 and 30.734 mm on the 40t-5.
- Face width between the flanges (b): 7.366 mm on the 36t-8 timing pulley, the same on the 36t-5 and the 40t-5.
- Width over the flanges (bf): 10.3 mm on the 36t-8 timing pulley, the same on the 36t-5 and the 40t-5.
- Overall length (L): 18 mm on the 36t-8 timing pulley, against 18 mm on the 36t-5 and 18.2626 mm on the 40t-5.
- Hub diameter (dh): 17.1704 mm on the 36t-8 timing pulley, against 17.1704 mm on the 36t-5 and 19.1516 mm on the 40t-5.
- Hub length (lh): 7.5692 mm on the 36t-8 timing pulley, against 7.5692 mm on the 36t-5 and 7.9756 mm on the 40t-5.
Other sizes
- One size smaller: 36t-5 Timing Pulley, GT2, 36 teeth, 5 mm bore, pitch diameter 22.92 mm, M3 set screws.
- One size larger: 40t-5 Timing Pulley, GT2, 40 teeth, 5 mm bore, pitch diameter 25.46 mm, M3 set screws.
Conventions
- Simplified only: one aluminium solid, the toothed band as a plain cylinder at the outside diameter. STEP AP214, millimetres, the bore on Z, the outer flange's face at z = 0, the hub toward +Z.
- Images show illustrative teeth, not Gates' profile.
- Illustrative, not dimensioned by any source read: the flange rim, hub and bore chamfers, the set screws' place along the hub, and the teeth in the images.
Documents
Sources
gates-light-power-precision, misumi-gpa-2gt, sdpsi-gt2-molded-6mm. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...