32009X Tapered Roller Bearing, ISO 355
The 32009X tapered roller bearing (ISO 355) has a 45 mm bore, a 75 mm outside diameter and a width of 20 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 32009X taper roller bearing, 32009X cone and cup bearing, 32009X wheel bearing
- Model id:
iso355-32009x
- Standard: ISO 355 · size 32009X
Files
| Part key | Simplified |
|---|
iso355-32009x | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 45 | | 45 | nominal | L1 |
| D | Outside diameter | | 75 | | 75 | nominal | L1 |
| T | Total width | | 20 | | 20 | nominal | L1 |
| B | Cone width | | 20 | | 20 | nominal | L1 |
| C | Cup width | | 15.5 | | 15.5 | nominal | L1 |
| r1 | Cone back face chamfer dimension | 1 | | | 1 | single limit (min), modeled at the limit | L1 |
| r3 | Cup back face chamfer dimension | 1 | | | 1 | single limit (min), modeled at the limit | L1 |
| d1 | Cone back face rib diameter | | 60.7 ref | | 60.7 | reference value | L0 (ref: one source) |
| Y | Axial load factor | | 1.53 | | 1.53 | nominal | L1 |
| alpha | Cup half angle | | 14.65 | | 14.65 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-ISO355-SZ-32009X.pdf.
The 32009X tapered roller bearing beside the 30208 and the 30209
The 32009X is number 13 of the 16 ISO 355 tapered roller bearings published here, listed from 30202 to 30210.
- Bore diameter (d): 45 mm on the 32009X tapered roller bearing, against 40 mm on the 30208 and 45 mm on the 30209.
- Outside diameter (D): 75 mm on the 32009X tapered roller bearing, against 80 mm on the 30208 and 85 mm on the 30209.
- Total width (T): 20 mm on the 32009X tapered roller bearing, against 19.75 mm on the 30208 and 20.75 mm on the 30209.
- Cone width (B): 20 mm on the 32009X tapered roller bearing, against 18 mm on the 30208 and 19 mm on the 30209.
- Cup width (C): 15.5 mm on the 32009X tapered roller bearing, against 16 mm on the 30208 and 16 mm on the 30209.
- Cone back face chamfer dimension (r1): at least 1 mm on the 32009X tapered roller bearing, against at least 1.5 mm on the 30208 and at least 1.5 mm on the 30209.
- Cup back face chamfer dimension (r3): at least 1 mm on the 32009X tapered roller bearing, against at least 1.5 mm on the 30208 and at least 1.5 mm on the 30209.
- Cone back face rib diameter (d1): 60.7 mm (reference) on the 32009X tapered roller bearing, against 57.5 mm (reference) on the 30208 and 63.1 mm (reference) on the 30209.
Other sizes
Conventions
- Simplified only: cone and cup as two solids, no rollers or cage. STEP AP214, millimetres, Z along the axis, the cone's back face at Z = 0.
- Bore d, outside diameter D, cone width B, cup width C and total width T at their nominals; the cone's back face at Z = 0, the cup's back face at Z = T.
- Rollers and cage not modeled: the band between the raceways is empty.
Documents
Sources
nsk-tapered, ntn-bearingfinder-tapered, rule-iso355-cup-angle, skf-17000-tapered, timken-tapered. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...