30208 Tapered Roller Bearing, ISO 355
For a 40 mm shaft and an 80 mm housing bore, the 30208 tapered roller bearing (ISO 355) is 19.75 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 30208 taper roller bearing, 30208 cone and cup bearing, 30208 wheel bearing
- Model id:
iso355-30208
- Standard: ISO 355 · size 30208
Files
| Part key | Simplified |
|---|
iso355-30208 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 40 | | 40 | nominal | L1 |
| D | Outside diameter | | 80 | | 80 | nominal | L1 |
| T | Total width | | 19.75 | | 19.75 | nominal | L1 |
| B | Cone width | | 18 | | 18 | nominal | L1 |
| C | Cup width | | 16 | | 16 | nominal | L1 |
| r1 | Cone back face chamfer dimension | 1.5 | | | 1.5 | single limit (min), modeled at the limit | L1 |
| r3 | Cup back face chamfer dimension | 1.5 | | | 1.5 | single limit (min), modeled at the limit | L1 |
| d1 | Cone back face rib diameter | | 57.5 ref | | 57.5 | reference value | L0 (ref: one source) |
| Y | Axial load factor | | 1.6 | | 1.6 | nominal | L1 |
| alpha | Cup half angle | | 14.04 | | 14.04 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-ISO355-SZ-30208.pdf.
The 30208 tapered roller bearing beside the 32008X and the 32009X
The 30208 is number 12 of the 16 ISO 355 tapered roller bearings published here, listed from 30202 to 30210.
- Bore diameter (d): 40 mm on the 30208 tapered roller bearing, against 40 mm on the 32008X and 45 mm on the 32009X.
- Outside diameter (D): 80 mm on the 30208 tapered roller bearing, against 68 mm on the 32008X and 75 mm on the 32009X.
- Total width (T): 19.75 mm on the 30208 tapered roller bearing, against 19 mm on the 32008X and 20 mm on the 32009X.
- Cone width (B): 18 mm on the 30208 tapered roller bearing, against 19 mm on the 32008X and 20 mm on the 32009X.
- Cup width (C): 16 mm on the 30208 tapered roller bearing, against 14.5 mm on the 32008X and 15.5 mm on the 32009X.
- Cone back face chamfer dimension (r1): at least 1.5 mm on the 30208 tapered roller bearing, against at least 1 mm on the 32008X and at least 1 mm on the 32009X.
- Cup back face chamfer dimension (r3): at least 1.5 mm on the 30208 tapered roller bearing, against at least 1 mm on the 32008X and at least 1 mm on the 32009X.
- Cone back face rib diameter (d1): 57.5 mm (reference) on the 30208 tapered roller bearing, against 54.7 mm (reference) on the 32008X and 60.7 mm (reference) on the 32009X.
Other sizes
Conventions
- Simplified only: cone and cup as two solids, no rollers or cage. STEP AP214, millimetres, Z along the axis, the cone's back face at Z = 0.
- Bore d, outside diameter D, cone width B, cup width C and total width T at their nominals; the cone's back face at Z = 0, the cup's back face at Z = T.
- Rollers and cage not modeled: the band between the raceways is empty.
Documents
Sources
nsk-tapered, ntn-bearingfinder-tapered, rule-iso355-cup-angle, skf-17000-tapered, timken-tapered. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...