14 mm Internal Retaining Ring (Bore Circlip), DIN 472

The 14 mm internal retaining ring (DIN 472) fits a 14 mm bore with a groove diameter of 14.6 mm, and is 1 mm thick. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: 14 mm circlip
• Model id: din472-d14
• Standard: DIN 472:2017 · size 14 mm

Files

Part key	Simplified
din472-d14	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
s	Ring thickness		1		1	nominal	L1
s_lim	Ring thickness, limits	0.94		1	0.97	midpoint of min–max	L0 (max: one source)
d3	Free diameter		15.1		15.1	nominal	L1
d3_lim	Free diameter, limits	15		15.46	15.23	midpoint of min–max	L1
a	Lug height			3.7	3.7	single limit (max), modeled at the limit	L1
b	Radial width		1.9 ref		1.9	reference value	L1
d5	Plier hole diameter	1.7			1.7	single limit (min), modeled at the limit	L1
d2	Groove diameter		14.6		14.6	nominal	L1
m	Groove width		1.1		1.1	nominal	L1
n	Groove edge margin	0.9			0.9	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-DIN472-SZ-14.pdf.

The 14 mm internal retaining ring beside the 13 mm and the 15 mm

The 14 mm is number 7, counting from the smallest, of the 17 DIN 472 internal retaining rings published here, from 8 mm to 25 mm.

• Ring thickness (s): 1 mm on the 14 mm internal retaining ring, the same on the 13 mm and the 15 mm.
• Ring thickness, limits (s_lim): 0.94 to 1 mm on the 14 mm internal retaining ring, the same on the 13 mm and the 15 mm.
• Free diameter (d3): 15.1 mm on the 14 mm internal retaining ring, against 14.1 mm on the 13 mm and 16.2 mm on the 15 mm.
• Free diameter, limits (d3_lim): 15 to 15.46 mm on the 14 mm internal retaining ring, against 14 to 14.46 mm on the 13 mm and 16.1 to 16.56 mm on the 15 mm.
• Lug height (a): up to 3.7 mm on the 14 mm internal retaining ring, against up to 3.6 mm on the 13 mm and up to 3.7 mm on the 15 mm.
• Radial width (b): 1.9 mm (reference) on the 14 mm internal retaining ring, against 1.8 mm (reference) on the 13 mm and 2 mm (reference) on the 15 mm.
• Plier hole diameter (d5): at least 1.7 mm on the 14 mm internal retaining ring, against at least 1.5 mm on the 13 mm and at least 1.7 mm on the 15 mm.
• Groove diameter (d2): 14.6 mm on the 14 mm internal retaining ring, against 13.6 mm on the 13 mm and 15.7 mm on the 15 mm.

Other sizes

• One size smaller: 13 mm Internal Retaining Ring (Bore Circlip), DIN 472, 13 mm bore, 13.6 mm groove, 1 mm thick.
• One size larger: 15 mm Internal Retaining Ring (Bore Circlip), DIN 472, 15 mm bore, 15.7 mm groove, 1 mm thick.

Documents

• CC-DIN472-DS-14.pdf: 14 datasheet: values with levels, sources
• CC-DIN472-SZ-14.pdf: 14 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

fasten-it-din472, fasteners-eu-din472, hc-maschinentechnik-din472, seeger-din472. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.