13 mm Internal Retaining Ring (Bore Circlip), DIN 472

For a 13 mm bore, grooved to 13.6 mm: the internal retaining ring (DIN 472), 1 mm thick. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: 13 mm circlip
• Model id: din472-d13
• Standard: DIN 472:2017 · size 13 mm

Files

Part key	Simplified
din472-d13	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
s	Ring thickness		1		1	nominal	L1
s_lim	Ring thickness, limits	0.94		1	0.97	midpoint of min–max	L0 (max: one source)
d3	Free diameter		14.1		14.1	nominal	L1
d3_lim	Free diameter, limits	14		14.46	14.23	midpoint of min–max	L1
a	Lug height			3.6	3.6	single limit (max), modeled at the limit	L1
b	Radial width		1.8 ref		1.8	reference value	L1
d5	Plier hole diameter	1.5			1.5	single limit (min), modeled at the limit	L1
d2	Groove diameter		13.6		13.6	nominal	L1
m	Groove width		1.1		1.1	nominal	L1
n	Groove edge margin	0.9			0.9	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-DIN472-SZ-13.pdf.

The 13 mm internal retaining ring beside the 12 mm and the 14 mm

The 13 mm is number 6, counting from the smallest, of the 17 DIN 472 internal retaining rings published here, from 8 mm to 25 mm.

• Ring thickness (s): 1 mm on the 13 mm internal retaining ring, the same on the 12 mm and the 14 mm.
• Ring thickness, limits (s_lim): 0.94 to 1 mm on the 13 mm internal retaining ring, the same on the 12 mm and the 14 mm.
• Free diameter (d3): 14.1 mm on the 13 mm internal retaining ring, against 13 mm on the 12 mm and 15.1 mm on the 14 mm.
• Free diameter, limits (d3_lim): 14 to 14.46 mm on the 13 mm internal retaining ring, against 12.9 to 13.36 mm on the 12 mm and 15 to 15.46 mm on the 14 mm.
• Lug height (a): up to 3.6 mm on the 13 mm internal retaining ring, against up to 3.4 mm on the 12 mm and up to 3.7 mm on the 14 mm.
• Radial width (b): 1.8 mm (reference) on the 13 mm internal retaining ring, against 1.7 mm (reference) on the 12 mm and 1.9 mm (reference) on the 14 mm.
• Plier hole diameter (d5): at least 1.5 mm on the 13 mm internal retaining ring, against at least 1.5 mm on the 12 mm and at least 1.7 mm on the 14 mm.
• Groove diameter (d2): 13.6 mm on the 13 mm internal retaining ring, against 12.5 mm on the 12 mm and 14.6 mm on the 14 mm.

Other sizes

• One size smaller: 12 mm Internal Retaining Ring (Bore Circlip), DIN 472, 12 mm bore, 12.5 mm groove, 1 mm thick.
• One size larger: 14 mm Internal Retaining Ring (Bore Circlip), DIN 472, 14 mm bore, 14.6 mm groove, 1 mm thick.

Documents

• CC-DIN472-DS-13.pdf: 13 datasheet: values with levels, sources
• CC-DIN472-SZ-13.pdf: 13 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

fasten-it-din472, fasteners-eu-din472, hc-maschinentechnik-din472, seeger-din472. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.