0.6 mm Split Pin, ISO 1234 datasheet (PDF)

Datasheet — 0.6 mm Split Pin, ISO 1234 by Milo

Open the PDF
0.6 mm Split Pin, ISO 1234Get the CAD model0.6 mm Split Pin, ISO 1234CC-ISO1234-DS-0.6.pdf

Text of this datasheet

. CC-1S801234-DS-0.6revA '?) CommunityCAD Size datasheet - 0.6

ISO 1234 split pin, size 0.6

Size datasheet: the split pin for a 0.6 mm hole. This size's values with their levels, its lengths, conventions and sources.

A Size For a 0.6 mm hole; pin \) @0.45 mm, eye 0.95 x 2 mm Lengths 6 generated, | = 4-12 Files 6 STEP AP214 (one detail level)

0.6 x 10, front view, 4:1

Dimension

Pin diameter, across both legs

a Extended prong (long leg past short) 1.

b Eye length, bearing point to eye end 2 ref

c Eye width, outside 0.95 L2 0.9-1.0

Modeled value: the midpoint of min-max. ref: reference value. * amber: one source (LO). Level - independent sources.

ISO 1234:1997 Page 1/2 Split pin - 0.6 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

'?) CommunityCAD

CC-1S801234-DS-0.6revA Size datasheet - 0.6

Lengths | Status Part key 4 built - - is01234-d0-6x4 5 built - - is01234-d0-6x5 6 built - - is01234-d0-6x6 8 built - - is01234-d0-6x8 10 built - - is01234-d0-6x10 12 built = - is01234-d0-6x12

One STEP file per length, one detail level.

Conventions

e d,aandc at their midpoints; b at its reference value (ADR 0104).

« band! measured from the bearing point, where the eye meets the hole.

« Teardrop eye of swept half-round wire (#601 item 2).

« Both legs square cut: end form not specified by the standard (#601 item 3). « No markings; material and finish are metadata only.

Sources Source Publisher Retrieved iso1234-1997-sample ISO (preview published by iTeh Standards) 2026-10-30 fasten-it-iso1234 fasten.it 2026-10-30 fasteners-eu-iso1234 fasteners.eu 2026-10-30 amesweb-iso1234 AMESweb 2026-10-30

The whole series (verification map, drawings): CC-ISO1234-DS.

ISO 1234:1997 Split pin - 0.6 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

sha256

890178a1e595 (kept outside the repo) a79d2411617a d5ca18516d5c 8F5042F7e5F4

Page 2/2 spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205