0.6 mm Split Pin, ISO 1234
A 0.6 mm split pin (ISO 1234). Here in 6 lengths from 4 to 12 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: 0.6 mm cotter pin, 0.6 mm split cotter pin, 0.6 mm x 4 to 0.6 mm x 12
- Model id:
iso1234-d0-6
- Standard: ISO 1234:1997 · size 0.6 mm
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 4 | iso1234-d0-6x4 | STEP |
| 5 | iso1234-d0-6x5 | STEP |
| 6 | iso1234-d0-6x6 | STEP |
| 8 | iso1234-d0-6x8 | STEP |
| 10 | iso1234-d0-6x10 | STEP |
| 12 | iso1234-d0-6x12 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Pin diameter | 0.4 | | 0.5 | 0.45 | midpoint of min–max | L2 |
| a | Extended prong | 0.8 | | 1.6 | 1.2 | midpoint of min–max | L2 |
| b | Eye length | | 2 ref | | 2 | reference value | L2 |
| c | Eye width | 0.9 | | 1 | 0.95 | midpoint of min–max | L2 |
Drawing

As a PDF: CC-ISO1234-SZ-0.6.pdf.
The 0.6 mm split pin beside the 0.8 mm
The 0.6 mm is the smallest of the 6 ISO 1234 split pins published here, from 0.6 mm to 2 mm.
- Pin diameter (d): 0.4 to 0.5 mm on the 0.6 mm split pin, against 0.6 to 0.7 mm on the 0.8 mm.
- Extended prong (a): 0.8 to 1.6 mm on the 0.6 mm split pin, the same on the 0.8 mm.
- Eye length (b): 2 mm (reference) on the 0.6 mm split pin, against 2.4 mm (reference) on the 0.8 mm.
- Eye width (c): 0.9 to 1 mm on the 0.6 mm split pin, against 1.2 to 1.4 mm on the 0.8 mm.
Other sizes
Conventions
- Simplified only: a split pin has no thread, so there is one detail level. STEP AP214, millimetres, Z up, the point where the eye bears on the hole at Z = 0, the eye toward +Z in the XZ plane, the long leg on +X.
- The nominal size is the split-pin hole's diameter; d (across both legs), a and c at the midpoints of their limits, b at its reference value.
Documents
Sources
amesweb-iso1234, fasten-it-iso1234, fasteners-eu-iso1234, iso1234-1997-sample. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...