40x80 slot 10 Extrusion End Cap

STEP · STL Supports CommunityCAD0 downloads
40x80 slot 10 Extrusion End Cap
1 / 6

40x80 slot 10 Extrusion End Cap

40 mm by 80 mm over its face, 3 mm thick at the seat and 2 mm corners: the 40x80 slot 10 extrusion end cap, as simplified STEP files.

40x80 slot 10 extrusion end cap, Extrusion end cap

How these parts are made, and what the levels mean: read the method

  • Also known as: 40x80 slot 10 profile end cap, 40x80 slot 10 T-slot end cover, 40x80 slot 10 aluminium extrusion end plate
  • Model id: extrusion-end-caps-s10-40x80
  • Standard: Extrusion end cap · size 40x80 slot 10

Files

Part keySimplified
extrusion-end-caps-s10-40x80STEP

Dimensions

Dimension symbols for 40x80 slot 10 extrusion end caps (Extrusion end cap)

SymbolNameminnommaxModeledRuleLevel
aCap width4040nominalL0 (nom: one source)
hCap height8080nominalL0 (nom: one source)
tSeat thickness33nominalL0 (nom: one source)
rCorner radius22nominalL0 (nom: one source)

Drawing

Drawing of the 40x80 slot 10 extrusion end cap with its values (Extrusion end cap)

As a PDF: CC-ENDCAP-SZ-s10-40x80.pdf.

The 40x80 slot 10 extrusion end cap beside the 40x40 slot 10 and the 45x45 slot 10

The 40x80 slot 10 is number 12 of the 16 Extrusion end caps published here, listed from 20x20 B-type slot 6 to 90x90 slot 10.

  • Cap width (a): 40 mm on the 40x80 slot 10 extrusion end cap, against 40 mm on the 40x40 slot 10 and 45 mm on the 45x45 slot 10.
  • Cap height (h): 80 mm on the 40x80 slot 10 extrusion end cap, against 40 mm on the 40x40 slot 10 and 45 mm on the 45x45 slot 10.
  • Seat thickness (t): 3 mm on the 40x80 slot 10 extrusion end cap, the same on the 40x40 slot 10 and the 45x45 slot 10.
  • Corner radius (r): 2 mm on the 40x80 slot 10 extrusion end cap, against 3 mm on the 40x40 slot 10 and 3 mm on the 45x45 slot 10.

Other sizes

Conventions

  • Simplified only: one solid, plate and plugs. STEP AP214, millimetres, the back face (on the profile's end) at Z = 0, the outer face at Z = t, the plugs toward -Z, the outline centred on the origin.
  • The cross plugs on the back, the face's edge round and the recessed CommunityCAD mark are illustrative, not any maker's design; the plugs are sized to the profile's core bore and measured only for fit.

Documents

Sources

misumi-end-caps. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ENDCAP-SZ-s10-40x80.pdf

Extrusion end cap, per profile cross-section, s10-40x80 Size drawing - s10-40x80 values on the views - enlarged 2:1 Sym. | Dimensi s10-40x80 * Cap width 40 x Cap height a ‘ 3x Seat thickness r 2x Corner radius Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey…

View full datasheet →

docs/CC-ENDCAP-DS-s10-40x80.pdf

CC-ENDCAP-DS-s10-40x80 rev A Size datasheet - s10-40x80 '?) CommunityCAD 40x80 slot 10 extrusion end cap Size datasheet: this size's values with their levels, conventions and sources. 7 ae cp For 40x80 slot 10 aluminium extrusion ends Part key extrusion-end-caps-s10-40x80 Files 1 STEP AP214…

View full datasheet →