40x80 I-type slot 8 Extrusion End Cap
The 40x80 I-type slot 8 extrusion end cap closes a profile end 40 mm × 80 mm, on a 4 mm seat. Here in simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 40x80 I-type slot 8 profile end cap, 40x80 I-type slot 8 T-slot end cover, 40x80 I-type slot 8 aluminium extrusion end plate
- Model id:
extrusion-end-caps-i8-40x80
- Standard: Extrusion end cap · size 40x80 I-type slot 8
Files
| Part key | Simplified |
|---|
extrusion-end-caps-i8-40x80 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Cap width | | 40 | | 40 | nominal | L1 |
| h | Cap height | | 80 | | 80 | nominal | L1 |
| t | Seat thickness | | 4 | | 4 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-ENDCAP-SZ-i8-40x80.pdf.
The 40x80 I-type slot 8 extrusion end cap beside the 40x40 I-type slot 8 and the 80x80 I-type slot 8
The 40x80 I-type slot 8 is number 9 of the 16 Extrusion end caps published here, listed from 20x20 B-type slot 6 to 90x90 slot 10.
- Cap width (a): 40 mm on the 40x80 I-type slot 8 extrusion end cap, against 40 mm on the 40x40 I-type slot 8 and 80 mm on the 80x80 I-type slot 8.
- Cap height (h): 80 mm on the 40x80 I-type slot 8 extrusion end cap, against 40 mm on the 40x40 I-type slot 8 and 80 mm on the 80x80 I-type slot 8.
- Seat thickness (t): 4 mm on the 40x80 I-type slot 8 extrusion end cap, the same on the 40x40 I-type slot 8 and the 80x80 I-type slot 8.
Other sizes
Conventions
- Simplified only: one solid, plate and plugs. STEP AP214, millimetres, the back face (on the profile's end) at Z = 0, the outer face at Z = t, the plugs toward -Z, the outline centred on the origin.
- The cross plugs on the back, the face's edge round and the recessed CommunityCAD mark are illustrative, not any maker's design; the plugs are sized to the profile's core bore and measured only for fit.
Documents
Sources
item-cap8, motedis-end-caps. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...