30x60 B-type slot 8 Extrusion End Cap
30 mm by 60 mm over its face, 3 mm thick at the seat and 2 mm corners: the 30x60 B-type slot 8 extrusion end cap, as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 30x60 B-type slot 8 profile end cap, 30x60 B-type slot 8 T-slot end cover, 30x60 B-type slot 8 aluminium extrusion end plate
- Model id:
extrusion-end-caps-b8-30x60
- Standard: Extrusion end cap · size 30x60 B-type slot 8
Files
| Part key | Simplified |
|---|
extrusion-end-caps-b8-30x60 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Cap width | | 30 | | 30 | nominal | L1 |
| h | Cap height | | 60 | | 60 | nominal | L1 |
| t | Seat thickness | | 3 | | 3 | nominal | L0 (nom: one source) |
| r | Corner radius | | 2 | | 2 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-ENDCAP-SZ-b8-30x60.pdf.
The 30x60 B-type slot 8 extrusion end cap beside the 30x30 B-type slot 8 and the 60x60 B-type slot 8
The 30x60 B-type slot 8 is number 6 of the 16 Extrusion end caps published here, listed from 20x20 B-type slot 6 to 90x90 slot 10.
- Cap width (a): 30 mm on the 30x60 B-type slot 8 extrusion end cap, against 30 mm on the 30x30 B-type slot 8 and 60 mm on the 60x60 B-type slot 8.
- Cap height (h): 60 mm on the 30x60 B-type slot 8 extrusion end cap, against 30 mm on the 30x30 B-type slot 8 and 60 mm on the 60x60 B-type slot 8.
- Seat thickness (t): 3 mm on the 30x60 B-type slot 8 extrusion end cap, the same on the 30x30 B-type slot 8 and the 60x60 B-type slot 8.
- Corner radius (r): 2 mm on the 30x60 B-type slot 8 extrusion end cap, the same on the 30x30 B-type slot 8 and the 60x60 B-type slot 8.
Other sizes
Conventions
- Simplified only: one solid, plate and plugs. STEP AP214, millimetres, the back face (on the profile's end) at Z = 0, the outer face at Z = t, the plugs toward -Z, the outline centred on the origin.
- The cross plugs on the back, the face's edge round and the recessed CommunityCAD mark are illustrative, not any maker's design; the plugs are sized to the profile's core bore and measured only for fit.
Documents
Sources
misumi-end-caps, motedis-end-caps. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...