m2-z25 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m2-z25 Spur Gear, Spur gear
1 / 7

m2-z25 Spur Gear, Spur gear

The m2-z25 spur gear: reference (pitch) diameter 50 mm, tip (outside) diameter 54 mm, root diameter 45 mm. Available as simplified STEP files.

m2-z25 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m2-z25 metric spur gear, m2-z25 involute gear, m2-z25 straight cut gear, m2-z25 pinion
  • Model id: spur-gears-m2-z25
  • Standard: Spur gear · size m2-z25

Files

Part keySimplified
spur-gears-m2-z25STEP

Dimensions

Dimension symbols for m2-z25 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter5050nominalL2
daTip (outside) diameter5454nominalL2
dfRoot diameter4545nominalL0 (nom: one source)
dsBore diameter1212nominalL2
dhHub diameter4040nominalL2
bFace width2020nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter3535nominalL0 (nom: one source)
ds_hpcHPC's bore1515nominalL0 (nom: one source)
LTotal length3030nominalL2

Drawing

Drawing of the m2-z25 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m2-z25.pdf.

The m2-z25 spur gear beside the m2-z20 and the m2-z30

The m2-z25 is number 28 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 50 mm on the m2-z25 spur gear, against 40 mm on the m2-z20 and 60 mm on the m2-z30.
  • Tip (outside) diameter (da): 54 mm on the m2-z25 spur gear, against 44 mm on the m2-z20 and 64 mm on the m2-z30.
  • Root diameter (df): 45 mm on the m2-z25 spur gear, against 35 mm on the m2-z20 and 55 mm on the m2-z30.
  • Bore diameter (ds): 12 mm on the m2-z25 spur gear, the same on the m2-z20 and the m2-z30.
  • Hub diameter (dh): 40 mm on the m2-z25 spur gear, against 32 mm on the m2-z20 and 50 mm on the m2-z30.
  • Face width (b): 20 mm on the m2-z25 spur gear, the same on the m2-z20 and the m2-z30.
  • Hub width (lh): 10 mm on the m2-z25 spur gear, the same on the m2-z20 and the m2-z30.
  • HPC's hub (boss) diameter (dh_hpc): 35 mm on the m2-z25 spur gear, against 30 mm on the m2-z20 and 40 mm on the m2-z30.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m2-z25.pdf

'?) CommunityCAD CC-SPUR-DS-m2-z25 revA Size datasheet - m2-z25 Module 2, 25 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. For meshing with other module 2 gears on a parallel shaft Part key spur-gears-m2-z25 Files 1 STEP AP214 (simplified) m2-z25,…

View full datasheet →

docs/CC-SPUR-SZ-m2-z25.pdf

Involute spur gear, ISO 53 basic rack, m2-z25 Size drawing - m2-z25 values on the views - enlarged 2:1 @d = 50.00 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC boss…

View full datasheet →