m0.8-z20 Spur Gear, Spur gear
The m0.8-z20 spur gear: reference (pitch) diameter 16 mm, tip (outside) diameter 17.6 mm, root diameter 14 mm. Available as simplified STEP files.

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: m0.8-z20 metric spur gear, m0.8-z20 involute gear, m0.8-z20 straight cut gear, m0.8-z20 pinion
- Model id:
spur-gears-m0-8-z20
- Standard: Spur gear · size m0.8-z20
Files
| Part key | Simplified |
|---|
spur-gears-m0-8-z20 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Reference (pitch) diameter | | 16 | | 16 | nominal | L2 |
| da | Tip (outside) diameter | | 17.6 | | 17.6 | nominal | L2 |
| df | Root diameter | | 14 | | 14 | nominal | L0 (nom: one source) |
| ds | Bore diameter | | 5 | | 5 | nominal | L2 |
| dh | Hub diameter | | 13 | | 13 | nominal | L2 |
| b | Face width | | 8 | | 8 | nominal | L2 |
| lh | Hub width | | 8 | | 8 | nominal | L2 |
| dh_hpc | HPC's hub (boss) diameter | | 12 | | 12 | nominal | L0 (nom: one source) |
| ds_hpc | HPC's bore | | 5 | | 5 | nominal | L0 (nom: one source) |
| L | Total length | | 16 | | 16 | nominal | L2 |
Drawing

As a PDF: CC-SPUR-SZ-m0.8-z20.pdf.
The m0.8-z20 spur gear beside the m0.8-z15 and the m0.8-z25
The m0.8-z20 is number 8 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.
- Reference (pitch) diameter (d): 16 mm on the m0.8-z20 spur gear, against 12 mm on the m0.8-z15 and 20 mm on the m0.8-z25.
- Tip (outside) diameter (da): 17.6 mm on the m0.8-z20 spur gear, against 13.6 mm on the m0.8-z15 and 21.6 mm on the m0.8-z25.
- Root diameter (df): 14 mm on the m0.8-z20 spur gear, against 10 mm on the m0.8-z15 and 18 mm on the m0.8-z25.
- Bore diameter (ds): 5 mm on the m0.8-z20 spur gear, the same on the m0.8-z15 and the m0.8-z25.
- Hub diameter (dh): 13 mm on the m0.8-z20 spur gear, against 13.6 mm on the m0.8-z15 and 16 mm on the m0.8-z25.
- Face width (b): 8 mm on the m0.8-z20 spur gear, the same on the m0.8-z15 and the m0.8-z25.
- Hub width (lh): 8 mm on the m0.8-z20 spur gear, against 14 mm on the m0.8-z15 and 8 mm on the m0.8-z25.
- HPC's hub (boss) diameter (dh_hpc): 12 mm on the m0.8-z20 spur gear, the same on the m0.8-z15 and the m0.8-z25.
Other sizes
Conventions
- One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
- Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
- Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.
Documents
Sources
hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...