2x2 Disc Magnet, Neodymium
2 mm across and 2 mm high, the 2x2 disc magnet (Neodymium disc magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 2x2 round magnet, 2x2 rare earth magnet, 2x2 button magnet, 2x2 neodymium magnet
- Model id:
magnets-disc-2x2
- Standard: Neodymium disc magnet · size 2x2
Files
| Part key | Simplified |
|---|
magnets-disc-2x2 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Diameter | | 2 | | 2 | nominal | L1 |
| H | Height | | 2 | | 2 | nominal | L1 |
Drawing

As a PDF: CC-MAGDISC-SZ-2x2.pdf.
What each maker states
- supermagnete lists this size in N48.
- first4magnets lists this size in N35, N42, N42SH.
- The shape is the same in any grade.
The 2x2 disc magnet beside the 2x1 and the 3x1
The 2x2 is number 2 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.
- Diameter (D): 2 mm on the 2x2 disc magnet, against 2 mm on the 2x1 and 3 mm on the 3x1.
- Height (H): 2 mm on the 2x2 disc magnet, against 1 mm on the 2x1 and 1 mm on the 3x1.
Other sizes
- One size smaller: 2x1 Disc Magnet, Neodymium, 2 mm across, 1 mm high, nickel-plated, axially magnetised.
- One size larger: 3x1 Disc Magnet, Neodymium, 3 mm across, 1 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...