15x8 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
15x8 Disc Magnet, Neodymium
1 / 5

15x8 Disc Magnet, Neodymium

The 15x8 disc magnet (Neodymium disc magnet) is 15 mm across and 8 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

15x8 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 15x8 round magnet, 15x8 rare earth magnet, 15x8 button magnet, 15x8 neodymium magnet
  • Model id: magnets-disc-15x8
  • Standard: Neodymium disc magnet · size 15x8

Files

Part keySimplified
magnets-disc-15x8STEP

Dimensions

Dimension symbols for 15x8 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter1515nominalL1
HHeight88nominalL1

Drawing

Drawing of the 15x8 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-15x8.pdf.

What each maker states

  • supermagnete lists this size in N42.
  • first4magnets lists this size in N42.
  • The shape is the same in any grade.

The 15x8 disc magnet beside the 15x5 and the 20x2

The 15x8 is number 43 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 15 mm on the 15x8 disc magnet, against 15 mm on the 15x5 and 20 mm on the 20x2.
  • Height (H): 8 mm on the 15x8 disc magnet, against 5 mm on the 15x5 and 2 mm on the 20x2.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-SZ-15x8.pdf

Neodymium disc magnet, diameter x height, 15x8 Size drawing - 15x8 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / =…

View full datasheet →

docs/CC-MAGDISC-DS-15x8.pdf

* CC-MAGDISC-DS-15x8 rev A '?) CommunityCAD Size datasheet - 15x8 15 x 8 mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Part key magnets-disc-15x8 Files 1 STEP AP214 (simplified)…

View full datasheet →