15x5 Disc Magnet, Neodymium
15 mm across and 5 mm high, the 15x5 disc magnet (Neodymium disc magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 15x5 round magnet, 15x5 rare earth magnet, 15x5 button magnet, 15x5 neodymium magnet
- Model id:
magnets-disc-15x5
- Standard: Neodymium disc magnet · size 15x5
Files
| Part key | Simplified |
|---|
magnets-disc-15x5 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Diameter | | 15 | | 15 | nominal | L1 |
| H | Height | | 5 | | 5 | nominal | L1 |
Drawing

As a PDF: CC-MAGDISC-SZ-15x5.pdf.
What each maker states
- supermagnete lists this size in N42.
- first4magnets lists this size in N42, N52.
- The shape is the same in any grade.
The 15x5 disc magnet beside the 15x3 and the 15x8
The 15x5 is number 42 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.
- Diameter (D): 15 mm on the 15x5 disc magnet, the same on the 15x3 and the 15x8.
- Height (H): 5 mm on the 15x5 disc magnet, against 3 mm on the 15x3 and 8 mm on the 15x8.
Other sizes
- One size smaller: 15x3 Disc Magnet, Neodymium, 15 mm across, 3 mm high, nickel-plated, axially magnetised.
- One size larger: 15x8 Disc Magnet, Neodymium, 15 mm across, 8 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...