10x1 Disc Magnet, Neodymium
The 10x1 disc magnet (Neodymium disc magnet) is 10 mm across and 1 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 10x1 round magnet, 10x1 rare earth magnet, 10x1 button magnet, 10x1 neodymium magnet
- Model id:
magnets-disc-10x1
- Standard: Neodymium disc magnet · size 10x1
Files
| Part key | Simplified |
|---|
magnets-disc-10x1 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Diameter | | 10 | | 10 | nominal | L1 |
| H | Height | | 1 | | 1 | nominal | L1 |
Drawing

As a PDF: CC-MAGDISC-SZ-10x1.pdf.
What each maker states
- supermagnete lists this size in N35.
- first4magnets lists this size in N35, N42.
- The shape is the same in any grade.
The 10x1 disc magnet beside the 9x3 and the 10x1.5
The 10x1 is number 27 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.
- Diameter (D): 10 mm on the 10x1 disc magnet, against 9 mm on the 9x3 and 10 mm on the 10x1.5.
- Height (H): 1 mm on the 10x1 disc magnet, against 3 mm on the 9x3 and 1.5 mm on the 10x1.5.
Other sizes
- One size smaller: 9x3 Disc Magnet, Neodymium, 9 mm across, 3 mm high, nickel-plated, axially magnetised.
- One size larger: 10x1.5 Disc Magnet, Neodymium, 10 mm across, 1.5 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...