20x4x2 Block Magnet, Neodymium
20 mm long, 4 mm wide and 2 mm high, the 20x4x2 block magnet (Neodymium block magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 20x4x2 bar magnet, 20x4x2 rectangular magnet, 20x4x2 rare earth magnet, 20x4x2 neodymium magnet
- Model id:
magnets-block-20x4x2
- Standard: Neodymium block magnet · size 20x4x2
Files
| Part key | Simplified |
|---|
magnets-block-20x4x2 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Length | | 20 | | 20 | nominal | L1 |
| W | Width | | 4 | | 4 | nominal | L1 |
| H | Height | | 2 | | 2 | nominal | L1 |
Drawing

As a PDF: CC-MAGBLOCK-SZ-20x4x2.pdf.
What each maker states
- supermagnete lists this size in N45.
- first4magnets lists this size in N42.
- The shape is the same in any grade.
The 20x4x2 block magnet beside the 15x4x4 and the 20x10x2
The 20x4x2 is number 12 of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.
- Length (L): 20 mm on the 20x4x2 block magnet, against 15 mm on the 15x4x4 and 20 mm on the 20x10x2.
- Width (W): 4 mm on the 20x4x2 block magnet, against 4 mm on the 15x4x4 and 10 mm on the 20x10x2.
- Height (H): 2 mm on the 20x4x2 block magnet, against 4 mm on the 15x4x4 and 2 mm on the 20x10x2.
Other sizes
- One size smaller: 15x4x4 Block Magnet, Neodymium, 15 mm long, 4 mm wide, 4 mm high, nickel-plated, axially magnetised.
- One size larger: 20x10x2 Block Magnet, Neodymium, 20 mm long, 10 mm wide, 2 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...