10x10x5 Block Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
10x10x5 Block Magnet, Neodymium
1 / 5

10x10x5 Block Magnet, Neodymium

10 mm long, 10 mm wide and 5 mm high, the 10x10x5 block magnet (Neodymium block magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

10x10x5 block magnet, Neodymium block magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 10x10x5 bar magnet, 10x10x5 rectangular magnet, 10x10x5 rare earth magnet, 10x10x5 neodymium magnet
  • Model id: magnets-block-10x10x5
  • Standard: Neodymium block magnet · size 10x10x5

Files

Part keySimplified
magnets-block-10x10x5STEP

Dimensions

Dimension symbols for 10x10x5 block magnets (Neodymium block magnet)

SymbolNameminnommaxModeledRuleLevel
LLength1010nominalL1
WWidth1010nominalL1
HHeight55nominalL1

Drawing

Drawing of the 10x10x5 block magnet with its values (Neodymium block magnet)

As a PDF: CC-MAGBLOCK-SZ-10x10x5.pdf.

What each maker states

  • supermagnete lists this size in N42.
  • first4magnets lists this size in N42.
  • The shape is the same in any grade.

The 10x10x5 block magnet beside the 10x10x3 and the 15x4x4

The 10x10x5 is number 10 of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.

  • Length (L): 10 mm on the 10x10x5 block magnet, against 10 mm on the 10x10x3 and 15 mm on the 15x4x4.
  • Width (W): 10 mm on the 10x10x5 block magnet, against 10 mm on the 10x10x3 and 4 mm on the 15x4x4.
  • Height (H): 5 mm on the 10x10x5 block magnet, against 3 mm on the 10x10x3 and 4 mm on the 15x4x4.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGBLOCK-SZ-10x10x5.pdf

Neodymium block magnet, length x width x height, 10x10x5 Size drawing - 10x10x5 values on the views - enlarged 8:1 Dimension 10x10x5 Length, the longer side Width, the other side Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under…

View full datasheet →

docs/CC-MAGBLOCK-DS-10x10x5.pdf

* CC-MAGBLOCK-DS-10x10x5 rev A '?) CommunityCAD Size datasheet - 10x10x5 10 x 10 x 5 mm neodymium block magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Part key magnets-block-10x10x5 Files 1 STEP…

View full datasheet →