23x41 Stepper Motor, NEMA ICS 16

STEP Supports CommunityCAD0 downloads
23x41 Stepper Motor, NEMA ICS 16
1 / 7

23x41 Stepper Motor, NEMA ICS 16

The 23x41 stepper motor (NEMA ICS 16) is a NEMA 23 frame: a body 56.4 mm square and 41 mm long, four 5.207 mm holes 47.146 mm apart, a 38.1 mm pilot and a 6.35 mm shaft 21 mm long. Modeled as simplified STEP files.

23x41 stepper motor, NEMA ICS 16

How these parts are made, and what the levels mean: read the method

  • Also known as: 23x41 NEMA stepper, 23x41 hybrid stepper motor, 23x41 stepping motor
  • Model id: nema-steppers-23x41
  • Standard: NEMA ICS 16 · size 23x41

Files

Part keySimplified
nema-steppers-23x41STEP

Dimensions

Dimension symbols for 23x41 stepper motors (NEMA ICS 16)

SymbolNameminnommaxModeledRuleLevel
LBody length4141nominalL0 (nom: one source)
BDBody square56.456.4nominalL1
AMounting hole spacing47.14647.146nominalL1
nhNumber of mounting holes44nominalL1
dhMounting hole diameter5.2075.207nominalL1
NPilot diameter38.138.1nominalL1
TPilot height1.5241.63.3021.6nominalL1
DShaft diameter6.356.35nominalL1
EShaft length2121nominalL1
FShaft flat5.85.8nominalL0 (nom: one source)
LfFlat length1515nominalL0 (nom: one source)

Drawing

Drawing of the 23x41 stepper motor with its values (NEMA ICS 16)

As a PDF: CC-NEMA-SZ-23x41.pdf.

The 23x41 stepper motor beside the 17x60 and the 23x55

The 23x41 is number 13 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.

  • Body length (L): 41 mm on the 23x41 stepper motor, against 60 mm on the 17x60 and 55 mm on the 23x55.
  • Body square (BD): 56.4 mm on the 23x41 stepper motor, against 42.3 mm on the 17x60 and 56.4 mm on the 23x55.
  • Mounting hole spacing (A): 47.146 mm on the 23x41 stepper motor, against 30.982 mm on the 17x60 and 47.146 mm on the 23x55.
  • Number of mounting holes (nh): 4 on the 23x41 stepper motor, the same on the 17x60 and the 23x55.
  • Mounting hole diameter (dh): 5.207 mm on the 23x41 stepper motor, the same on the 23x55.
  • Pilot diameter (N): 38.1 mm on the 23x41 stepper motor, against 21.99894 mm on the 17x60 and 38.1 mm on the 23x55.
  • Pilot height (T): 1.6 mm on the 23x41 stepper motor, against 2 mm on the 17x60 and 1.6 mm on the 23x55.
  • Shaft diameter (D): 6.35 mm on the 23x41 stepper motor, against 5 mm on the 17x60 and 6.35 mm on the 23x55.

Other sizes

  • One size smaller: 17x60 Stepper Motor, NEMA ICS 16, NEMA 17, 42.3 mm square, 60 mm long, 5 mm shaft, M3 mounting holes 30.982 mm apart, Leadshine and MOONS' data.
  • One size larger: 23x55 Stepper Motor, NEMA ICS 16, NEMA 23, 56.4 mm square, 55 mm long, 6.35 mm shaft, 5.207 mm mounting holes 47.146 mm apart, Anaheim Automation, Leadshine and MOONS' data.

Conventions

  • STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.

Documents

Sources

anaheim-23y, engineersedge-ics16-inch-flanges, engineersedge-ics16-inch-shafts, leadshine-cm-steppers-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-NEMA-SZ-23x41.pdf

NEMA hybrid stepper motor, frame x body length, 23x41 Size drawing - 23x41 values on the views - enlarged 1.5:1 Body length (house) Body square Mounting hole spacing Number of mounting holes Through hole diameter Pilot diameter Boil 1.6 1.524-3.302 Pilot height Shaft diameter CoS Shaft length from…

View full datasheet →

docs/CC-NEMA-DS-23x41.pdf

CC-NEMA-DS-23x41 rev A Size datasheet - 23x41 '?) CommunityCAD NEMA 23 stepper motor, 41mm body Size datasheet: this size's values with their levels, conventions and sources. For NEMA 23 motor mounts and brackets Part key nema-steppers-23x41 Files 1 STEP AP214 (simplified) 23x41, mounting face,…

View full datasheet →