14x27 Stepper Motor, NEMA ICS 16
The 14x27 stepper motor (NEMA ICS 16) is a NEMA 14 frame: a body up to 35.3 mm square and 27 mm long, four M3 holes 26 mm apart, a 22 mm pilot and a 5 mm shaft 24 mm long. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 14x27 NEMA stepper, 14x27 hybrid stepper motor, 14x27 stepping motor
- Model id:
nema-steppers-14x27
- Standard: NEMA ICS 16 · size 14x27
Files
| Part key | Simplified |
|---|
nema-steppers-14x27 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 27 | | 27 | nominal | L0 (nom: one source) |
| BD | Body square | | | 35.3 | 35.3 | single limit (max), modeled at the limit | L1 |
| A | Mounting hole spacing | | 26 | | 26 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dt | Mounting hole thread | | 3 | | 3 | nominal | L1 |
| N | Pilot diameter | | 22 | | 22 | nominal | L1 |
| T | Pilot height | | 2 | | 2 | nominal | L1 |
| D | Shaft diameter | | 5 | | 5 | nominal | L1 |
| E | Shaft length | | 24 | | 24 | nominal | L1 |
| F | Shaft flat | | 4.5 | | 4.5 | nominal | L1 |
| Lf | Flat length | | 15 | | 15 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-NEMA-SZ-14x27.pdf.
The 14x27 stepper motor beside the 11x52 and the 17x26
The 14x27 is number 7 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 27 mm on the 14x27 stepper motor, against 52 mm on the 11x52 and 26 mm on the 17x26.
- Body square (BD): up to 35.3 mm on the 14x27 stepper motor, against up to 28.3 mm on the 11x52 and 42.3 mm on the 17x26.
- Mounting hole spacing (A): 26 mm on the 14x27 stepper motor, against 23 mm on the 11x52 and 30.982 mm on the 17x26.
- Number of mounting holes (nh): 4 on the 14x27 stepper motor, the same on the 11x52 and the 17x26.
- Mounting hole thread (dt): 3 mm on the 14x27 stepper motor, against 2.5 mm on the 11x52 and 3 mm on the 17x26.
- Pilot diameter (N): 22 mm on the 14x27 stepper motor, against 22 mm on the 11x52 and 21.99894 mm on the 17x26.
- Pilot height (T): 2 mm on the 14x27 stepper motor, the same on the 11x52 and the 17x26.
- Shaft diameter (D): 5 mm on the 14x27 stepper motor, the same on the 11x52 and the 17x26.
Other sizes
- One size smaller: 11x52 Stepper Motor, NEMA ICS 16, NEMA 11, up to 28.3 mm square, 52 mm long, 5 mm shaft, M2.5 mounting holes 23 mm apart, Leadshine, MOONS' and Oriental Motor data.
- One size larger: 17x26 Stepper Motor, NEMA ICS 16, NEMA 17, 42.3 mm square, 26 mm long, 5 mm shaft, M3 mounting holes 30.982 mm apart, Leadshine and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
leadshine-cm-steppers, leadshine-cm-steppers-figures, moons-hybrid-steppers, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...