11x41 Stepper Motor, NEMA ICS 16
41 mm long behind an up to 28.3 mm square face, the 11x41 stepper motor (NEMA ICS 16) mounts by four M2.5 holes 23 mm apart around a 22 mm pilot; its shaft is 5 mm across, 24 mm long, flatted to 4.5 mm. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 11x41 NEMA stepper, 11x41 hybrid stepper motor, 11x41 stepping motor
- Model id:
nema-steppers-11x41
- Standard: NEMA ICS 16 · size 11x41
Files
| Part key | Simplified |
|---|
nema-steppers-11x41 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 41 | | 41 | nominal | L0 (nom: one source) |
| BD | Body square | | | 28.3 | 28.3 | single limit (max), modeled at the limit | L1 |
| A | Mounting hole spacing | | 23 | | 23 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dt | Mounting hole thread | | 2.5 | | 2.5 | nominal | L1 |
| N | Pilot diameter | | 22 | | 22 | nominal | L1 |
| T | Pilot height | | 2 | | 2 | nominal | L1 |
| D | Shaft diameter | | 5 | | 5 | nominal | L1 |
| E | Shaft length | | 24 | | 24 | nominal | L1 |
| F | Shaft flat | | 4.5 | | 4.5 | nominal | L1 |
| Lf | Flat length | | 15 | | 15 | nominal | L1 |
Drawing

As a PDF: CC-NEMA-SZ-11x41.pdf.
The 11x41 stepper motor beside the 11x32 and the 11x52
The 11x41 is number 5 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 41 mm on the 11x41 stepper motor, against 32 mm on the 11x32 and 52 mm on the 11x52.
- Body square (BD): up to 28.3 mm on the 11x41 stepper motor, the same on the 11x32 and the 11x52.
- Mounting hole spacing (A): 23 mm on the 11x41 stepper motor, the same on the 11x32 and the 11x52.
- Number of mounting holes (nh): 4 on the 11x41 stepper motor, the same on the 11x32 and the 11x52.
- Mounting hole thread (dt): 2.5 mm on the 11x41 stepper motor, the same on the 11x32 and the 11x52.
- Pilot diameter (N): 22 mm on the 11x41 stepper motor, the same on the 11x32 and the 11x52.
- Pilot height (T): 2 mm on the 11x41 stepper motor, the same on the 11x32 and the 11x52.
- Shaft diameter (D): 5 mm on the 11x41 stepper motor, the same on the 11x32 and the 11x52.
Other sizes
- One size smaller: 11x32 Stepper Motor, NEMA ICS 16, NEMA 11, up to 28.3 mm square, 32 mm long, 5 mm shaft, M2.5 mounting holes 23 mm apart, Leadshine, MOONS' and Oriental Motor data.
- One size larger: 11x52 Stepper Motor, NEMA ICS 16, NEMA 11, up to 28.3 mm square, 52 mm long, 5 mm shaft, M2.5 mounting holes 23 mm apart, Leadshine, MOONS' and Oriental Motor data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
leadshine-cm-steppers, leadshine-cm-steppers-figures, moons-hybrid-steppers-figures, orientalmotor-pkp22-drawing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...