11x32 Stepper Motor, NEMA ICS 16
The 11x32 stepper motor (NEMA ICS 16) is a NEMA 11 frame: a body up to 28.3 mm square and 32 mm long, four M2.5 holes 23 mm apart, a 22 mm pilot and a 5 mm shaft 24 mm long. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 11x32 NEMA stepper, 11x32 hybrid stepper motor, 11x32 stepping motor
- Model id:
nema-steppers-11x32
- Standard: NEMA ICS 16 · size 11x32
Files
| Part key | Simplified |
|---|
nema-steppers-11x32 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 32 | | 32 | nominal | L0 (nom: one source) |
| BD | Body square | | | 28.3 | 28.3 | single limit (max), modeled at the limit | L1 |
| A | Mounting hole spacing | | 23 | | 23 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dt | Mounting hole thread | | 2.5 | | 2.5 | nominal | L1 |
| N | Pilot diameter | | 22 | | 22 | nominal | L1 |
| T | Pilot height | | 2 | | 2 | nominal | L1 |
| D | Shaft diameter | | 5 | | 5 | nominal | L1 |
| E | Shaft length | | 24 | | 24 | nominal | L1 |
| F | Shaft flat | | 4.5 | | 4.5 | nominal | L1 |
| Lf | Flat length | | 15 | | 15 | nominal | L1 |
Drawing

As a PDF: CC-NEMA-SZ-11x32.pdf.
The 11x32 stepper motor beside the 8x48 and the 11x41
The 11x32 is number 4 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 32 mm on the 11x32 stepper motor, against 48 mm on the 8x48 and 41 mm on the 11x41.
- Body square (BD): up to 28.3 mm on the 11x32 stepper motor, against up to 20.3 mm on the 8x48 and up to 28.3 mm on the 11x41.
- Mounting hole spacing (A): 23 mm on the 11x32 stepper motor, against 16 mm on the 8x48 and 23 mm on the 11x41.
- Number of mounting holes (nh): 4 on the 11x32 stepper motor, the same on the 8x48 and the 11x41.
- Mounting hole thread (dt): 2.5 mm on the 11x32 stepper motor, against 2 mm on the 8x48 and 2.5 mm on the 11x41.
- Pilot diameter (N): 22 mm on the 11x32 stepper motor, against 16 mm on the 8x48 and 22 mm on the 11x41.
- Pilot height (T): 2 mm on the 11x32 stepper motor, against 1.5 mm on the 8x48 and 2 mm on the 11x41.
- Shaft diameter (D): 5 mm on the 11x32 stepper motor, against 4 mm on the 8x48 and 5 mm on the 11x41.
Other sizes
- One size smaller: 8x48 Stepper Motor, NEMA ICS 16, NEMA 8, up to 20.3 mm square, 48 mm long, 4 mm shaft, M2 mounting holes 16 mm apart, Anaheim Automation, Leadshine and MOONS' data.
- One size larger: 11x41 Stepper Motor, NEMA ICS 16, NEMA 11, up to 28.3 mm square, 41 mm long, 5 mm shaft, M2.5 mounting holes 23 mm apart, Leadshine, MOONS' and Oriental Motor data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
leadshine-cm-steppers, leadshine-cm-steppers-figures, moons-hybrid-steppers-figures, orientalmotor-pkp22-drawing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...