MR95 Miniature Ball Bearing

STL Supports CommunityCAD0 downloads
MR95 Miniature Ball Bearing
1 / 5

MR95 Miniature Ball Bearing

For a 5 mm shaft and a 9 mm housing bore, the MR95 miniature ball bearing (MR series) is 2.5 mm wide. Modeled as simplified STEP files.

MR95 miniature ball bearing, MR series

How these parts are made, and what the levels mean: read the method

  • Also known as: MR95 MR bearing, MR95 miniature deep groove ball bearing, MR95 small ball bearing
  • Model id: bearings-miniature-mr95
  • Standard: MR series · size MR95

Files

Part keySimplified
bearings-miniature-mr95STEP

Dimensions

Dimension symbols for MR95 miniature ball bearings (MR series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter55nominalL1
DOutside diameter99nominalL1
BWidth2.52.5nominalL1
rChamfer dimension0.10.1single limit (min), modeled at the limitL1

Drawing

Drawing of the MR95 miniature ball bearing with its values (MR series)

As a PDF: CC-BRG-MINI-SZ-MR95.pdf.

The MR95 miniature ball bearing beside the MR85 and the MR105

The MR95 is number 6, counting from the smallest, of the 12 MR series miniature ball bearings published here, from MR63 to MR148.

  • Bore diameter (d): 5 mm on the MR95 miniature ball bearing, the same on the MR85 and the MR105.
  • Outside diameter (D): 9 mm on the MR95 miniature ball bearing, against 8 mm on the MR85 and 10 mm on the MR105.
  • Width (B): 2.5 mm on the MR95 miniature ball bearing, against 2 mm on the MR85 and 3 mm on the MR105.
  • Chamfer dimension (r): at least 0.1 mm on the MR95 miniature ball bearing, against at least 0.08 mm on the MR85 and at least 0.1 mm on the MR105.

The MR95 miniature ball bearing in its other versions

Other sizes

Conventions

  • Simplified only: rings, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-DS-MR95.pdf

CC-BRG-MINI-DS-MR95 rev A Size datasheet - MR95 '?) CommunityCAD MR series MR95 miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 5 mm shafts Part keys bearings- miniature-mr95, bearings - miniature - mr95 - 2z,…

View full datasheet →

docs/CC-BRG-MINI-SZ-MR95.pdf

Miniature deep groove ball bearing, MR series, MR95 Size drawing - MR95 values on the views - MR95ZZ shown. Built from: open MR95 - 2Z MR95ZZ - 2RS MRY5ZZ - enlarged 10:1 View fro} Bearing MR9S MR95ZZ Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →