32009X Tapered Roller Bearing, ISO 355

STL Supports CommunityCAD0 downloads
32009X Tapered Roller Bearing, ISO 355
1 / 5

32009X Tapered Roller Bearing, ISO 355

The 32009X tapered roller bearing (ISO 355) has a 45 mm bore, a 75 mm outside diameter and a width of 20 mm. Get it as simplified STEP files.

32009X tapered roller bearing, ISO 355

How these parts are made, and what the levels mean: read the method

  • Also known as: 32009X taper roller bearing, 32009X cone and cup bearing, 32009X wheel bearing
  • Model id: iso355-32009x
  • Standard: ISO 355 · size 32009X

Files

Part keySimplified
iso355-32009xSTEP

Dimensions

Dimension symbols for 32009X tapered roller bearings (ISO 355)

SymbolNameminnommaxModeledRuleLevel
dBore diameter4545nominalL1
DOutside diameter7575nominalL1
TTotal width2020nominalL1
BCone width2020nominalL1
CCup width15.515.5nominalL1
r1Cone back face chamfer dimension11single limit (min), modeled at the limitL1
r3Cup back face chamfer dimension11single limit (min), modeled at the limitL1
d1Cone back face rib diameter60.7 ref60.7reference valueL0 (ref: one source)
YAxial load factor1.531.53nominalL1
alphaCup half angle14.6514.65nominalL0 (nom: one source)

Drawing

Drawing of the 32009X tapered roller bearing with its values (ISO 355)

As a PDF: CC-ISO355-SZ-32009X.pdf.

The 32009X tapered roller bearing beside the 30208 and the 30209

The 32009X is number 13 of the 16 ISO 355 tapered roller bearings published here, listed from 30202 to 30210.

  • Bore diameter (d): 45 mm on the 32009X tapered roller bearing, against 40 mm on the 30208 and 45 mm on the 30209.
  • Outside diameter (D): 75 mm on the 32009X tapered roller bearing, against 80 mm on the 30208 and 85 mm on the 30209.
  • Total width (T): 20 mm on the 32009X tapered roller bearing, against 19.75 mm on the 30208 and 20.75 mm on the 30209.
  • Cone width (B): 20 mm on the 32009X tapered roller bearing, against 18 mm on the 30208 and 19 mm on the 30209.
  • Cup width (C): 15.5 mm on the 32009X tapered roller bearing, against 16 mm on the 30208 and 16 mm on the 30209.
  • Cone back face chamfer dimension (r1): at least 1 mm on the 32009X tapered roller bearing, against at least 1.5 mm on the 30208 and at least 1.5 mm on the 30209.
  • Cup back face chamfer dimension (r3): at least 1 mm on the 32009X tapered roller bearing, against at least 1.5 mm on the 30208 and at least 1.5 mm on the 30209.
  • Cone back face rib diameter (d1): 60.7 mm (reference) on the 32009X tapered roller bearing, against 57.5 mm (reference) on the 30208 and 63.1 mm (reference) on the 30209.

Other sizes

Conventions

  • Simplified only: cone and cup as two solids, no rollers or cage. STEP AP214, millimetres, Z along the axis, the cone's back face at Z = 0.
  • Bore d, outside diameter D, cone width B, cup width C and total width T at their nominals; the cone's back face at Z = 0, the cup's back face at Z = T.
  • Rollers and cage not modeled: the band between the raceways is empty.

Documents

Sources

nsk-tapered, ntn-bearingfinder-tapered, rule-iso355-cup-angle, skf-17000-tapered, timken-tapered. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO355-DS-32009X.pdf

* CC-1S0355-DS-32009X rev A '?) CommunityCAD Size datasheet - 32009X ISO 355 32009X tapered roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 45 mm shafts, combined radial and axial loads Part key iso355-32009x Files 1 STEP AP214 (simplified),…

View full datasheet →

docs/CC-ISO355-SZ-32009X.pdf

ISO 355 single row tapered roller bearing, 32009X Size drawing - 32009X values on the views - scale 1:1 Bearing 32009X 15.5 |60.7 refx | 14.65% Source levels Main value = the modeled value (nominal, else the middle of min-max). a = 14.65°* Grey under a value = its min-max, where the source gives…

View full datasheet →