HK2012 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
HK2012 Needle Bearing, ISO 3245
1 / 5

HK2012 Needle Bearing, ISO 3245

The HK2012 needle bearing (ISO 3245) has a 20 mm bore, a 26 mm outside diameter and a width of 12 mm. Get it as simplified STEP files.

HK2012 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: HK2012 drawn cup needle roller bearing, HK2012 needle roller bearing, HK2012 drawn cup bearing
  • Model id: iso3245-hk2012
  • Standard: ISO 3245 · size HK2012

Files

Part keySimplified
iso3245-hk2012STEP

Dimensions

Dimension symbols for HK2012 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers2020nominalL1
DOutside diameter2626nominalL1
CWidth1212nominalL1
rChamfer dimension0.80.8single limit (min), modeled at the limitL1

Drawing

Drawing of the HK2012 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-SZ-HK2012.pdf.

The HK2012 needle bearing beside the HK2010 and the HK2016

The HK2012 is number 27 of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.

  • Bore diameter under the rollers (Fw): 20 mm on the HK2012 needle bearing, the same on the HK2010 and the HK2016.
  • Outside diameter (D): 26 mm on the HK2012 needle bearing, the same on the HK2010 and the HK2016.
  • Width (C): 12 mm on the HK2012 needle bearing, against 10 mm on the HK2010 and 16 mm on the HK2016.
  • Chamfer dimension (r): at least 0.8 mm on the HK2012 needle bearing, the same on the HK2010 and the HK2016.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-hk, ntn-bearingfinder-hk, schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-DS-HK2012.pdf

* CC-1S803245-DS-HK2012 revA '?) CommunityCAD Size datasheet - HK2012 ISO 3245 HK2012 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 20 mm shafts running directly on the rollers fmt on ont ‘ unt woun Part key iso3245-hk2012 if…

View full datasheet →

docs/CC-ISO3245-SZ-HK2012.pdf

ISO 3245 drawn cup needle roller bearing, open ends (HK), HK2012 Size drawing - HK2012 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1 Bearing HK2012 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →