HK1210 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
HK1210 Needle Bearing, ISO 3245
1 / 5

HK1210 Needle Bearing, ISO 3245

The HK1210 needle bearing (ISO 3245) has a 12 mm bore, a 16 mm outside diameter and a width of 10 mm. Get it as simplified STEP files.

HK1210 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: HK1210 drawn cup needle roller bearing, HK1210 needle roller bearing, HK1210 drawn cup bearing
  • Model id: iso3245-hk1210
  • Standard: ISO 3245 · size HK1210

Files

Part keySimplified
iso3245-hk1210STEP

Dimensions

Dimension symbols for HK1210 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers1212nominalL1
DOutside diameter1616nominalL1
CWidth1010nominalL1
rChamfer dimension0.40.4single limit (min), modeled at the limitL1

Drawing

Drawing of the HK1210 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-SZ-HK1210.pdf.

The HK1210 needle bearing beside the HK1015 and the HK1212

The HK1210 is number 15 of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.

  • Bore diameter under the rollers (Fw): 12 mm on the HK1210 needle bearing, against 10 mm on the HK1015 and 12 mm on the HK1212.
  • Outside diameter (D): 16 mm on the HK1210 needle bearing, against 14 mm on the HK1015 and 18 mm on the HK1212.
  • Width (C): 10 mm on the HK1210 needle bearing, against 15 mm on the HK1015 and 12 mm on the HK1212.
  • Chamfer dimension (r): at least 0.4 mm on the HK1210 needle bearing, against at least 0.4 mm on the HK1015 and at least 0.8 mm on the HK1212.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-hk, ntn-bearingfinder-hk, schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-DS-HK1210.pdf

* CC-1S03245-DS-HK1210 rev A '?) CommunityCAD Size datasheet - HK1210 ISO 3245 HK1210 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 12 mm shafts running directly on the rollers Part key iso3245-hk1210 Files 1 STEP AP214…

View full datasheet →

docs/CC-ISO3245-SZ-HK1210.pdf

ISO 3245 drawn cup needle roller bearing, open ends (HK), HK1210 Size drawing - HK1210 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 5:1 Bearing HK1210 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →