HK1015 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
HK1015 Needle Bearing, ISO 3245
1 / 5

HK1015 Needle Bearing, ISO 3245

For a 10 mm shaft and a 14 mm housing bore, the HK1015 needle bearing (ISO 3245) is 15 mm wide. Modeled as simplified STEP files.

HK1015 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: HK1015 drawn cup needle roller bearing, HK1015 needle roller bearing, HK1015 drawn cup bearing
  • Model id: iso3245-hk1015
  • Standard: ISO 3245 · size HK1015

Files

Part keySimplified
iso3245-hk1015STEP

Dimensions

Dimension symbols for HK1015 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers1010nominalL1
DOutside diameter1414nominalL1
CWidth1515nominalL1
rChamfer dimension0.40.4single limit (min), modeled at the limitL1

Drawing

Drawing of the HK1015 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-SZ-HK1015.pdf.

The HK1015 needle bearing beside the HK1012 and the HK1210

The HK1015 is number 14 of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.

  • Bore diameter under the rollers (Fw): 10 mm on the HK1015 needle bearing, against 10 mm on the HK1012 and 12 mm on the HK1210.
  • Outside diameter (D): 14 mm on the HK1015 needle bearing, against 14 mm on the HK1012 and 16 mm on the HK1210.
  • Width (C): 15 mm on the HK1015 needle bearing, against 12 mm on the HK1012 and 10 mm on the HK1210.
  • Chamfer dimension (r): at least 0.4 mm on the HK1015 needle bearing, the same on the HK1012 and the HK1210.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-hk, ntn-bearingfinder-hk, schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-SZ-HK1015.pdf

ISO 3245 drawn cup needle roller bearing, open ends (HK), HK1015 Size drawing - HK1015 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 5:1 Bearing HK1015 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →

docs/CC-ISO3245-DS-HK1015.pdf

* CC-1S03245-DS-HK1015 rev A '?) CommunityCAD Size datasheet - HK1015 ISO 3245 HK1015 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 10 mm shafts running directly on the rollers Part key iso3245-hk1015 Files 1 STEP AP214…

View full datasheet →