BK1412 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
BK1412 Needle Bearing, ISO 3245
1 / 5

BK1412 Needle Bearing, ISO 3245

For a 14 mm shaft and a 20 mm housing bore, the BK1412 needle bearing (ISO 3245) is 12 mm wide. Modeled as simplified STEP files.

BK1412 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: BK1412 drawn cup needle roller bearing, BK1412 needle roller bearing, BK1412 drawn cup bearing
  • Model id: iso3245-bk1412
  • Standard: ISO 3245 · size BK1412

Files

Part keySimplified
iso3245-bk1412STEP

Dimensions

Dimension symbols for BK1412 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers1414nominalL1
DOutside diameter2020nominalL1
CWidth1212nominalL1
CtDepth to the closed end9.39.3single limit (min), modeled at the limitL1
rChamfer dimension0.80.8single limit (min), modeled at the limitL1

Drawing

Drawing of the BK1412 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-BK-SZ-BK1412.pdf.

The BK1412 needle bearing beside the BK1312 and the BK1512

The BK1412 is number 16 of the 29 ISO 3245 needle bearings published here, listed from BK0306 to BK2526.

  • Bore diameter under the rollers (Fw): 14 mm on the BK1412 needle bearing, against 13 mm on the BK1312 and 15 mm on the BK1512.
  • Outside diameter (D): 20 mm on the BK1412 needle bearing, against 19 mm on the BK1312 and 21 mm on the BK1512.
  • Width (C): 12 mm on the BK1412 needle bearing, the same on the BK1312 and the BK1512.
  • Depth to the closed end (Ct): at least 9.3 mm on the BK1412 needle bearing, the same on the BK1312 and the BK1512.
  • Chamfer dimension (r): at least 0.8 mm on the BK1412 needle bearing, the same on the BK1312 and the BK1512.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup with a closed end and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, the open face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-bk, ntn-bearingfinder-bk, schaeffler-hr1-bk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-BK-DS-BK1412.pdf

* CC-1S03245 -BK-DS-BK1412 rev A '?) CommunityCAD Size datasheet - BK1412 ISO 3245 BK1412 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 14 mm shafts running directly on the rollers, closing a housing bore Part key…

View full datasheet →

docs/CC-ISO3245-BK-SZ-BK1412.pdf

ISO 3245 drawn cup needle roller bearing, closed end (BK), BK1412 Size drawing - BK1412 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 5:1 Bearing BK1412 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →