BK1012 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
BK1012 Needle Bearing, ISO 3245
1 / 5

BK1012 Needle Bearing, ISO 3245

The BK1012 needle bearing (ISO 3245) has a 10 mm bore, a 14 mm outside diameter and a width of 12 mm. Get it as simplified STEP files.

BK1012 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: BK1012 drawn cup needle roller bearing, BK1012 needle roller bearing, BK1012 drawn cup bearing
  • Model id: iso3245-bk1012
  • Standard: ISO 3245 · size BK1012

Files

Part keySimplified
iso3245-bk1012STEP

Dimensions

Dimension symbols for BK1012 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers1010nominalL1
DOutside diameter1414nominalL1
CWidth1212nominalL1
CtDepth to the closed end10.410.4single limit (min), modeled at the limitL1
rChamfer dimension0.40.4single limit (min), modeled at the limitL1

Drawing

Drawing of the BK1012 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-BK-SZ-BK1012.pdf.

The BK1012 needle bearing beside the BK1010 and the BK1015

The BK1012 is number 11 of the 29 ISO 3245 needle bearings published here, listed from BK0306 to BK2526.

  • Bore diameter under the rollers (Fw): 10 mm on the BK1012 needle bearing, the same on the BK1010 and the BK1015.
  • Outside diameter (D): 14 mm on the BK1012 needle bearing, the same on the BK1010 and the BK1015.
  • Width (C): 12 mm on the BK1012 needle bearing, against 10 mm on the BK1010 and 15 mm on the BK1015.
  • Depth to the closed end (Ct): at least 10.4 mm on the BK1012 needle bearing, against at least 8.4 mm on the BK1010 and at least 13.4 mm on the BK1015.
  • Chamfer dimension (r): at least 0.4 mm on the BK1012 needle bearing, the same on the BK1010 and the BK1015.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup with a closed end and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, the open face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-bk, ntn-bearingfinder-bk, schaeffler-hr1-bk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-BK-DS-BK1012.pdf

CC-1S03245 -BK-DS-BK1012 rev A Size datasheet - BK1012 '?) CommunityCAD ISO 3245 BK1012 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 10 mm shafts running directly on the rollers, closing a housing bore Part key iso3245-bk1012…

View full datasheet →

docs/CC-ISO3245-BK-SZ-BK1012.pdf

ISO 3245 drawn cup needle roller bearing, closed end (BK), BK1012 Size drawing - BK1012 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 5:1 Bearing BK1012 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →