F627 Flanged Ball Bearing

STL Supports CommunityCAD0 downloads
F627 Flanged Ball Bearing
1 / 5

F627 Flanged Ball Bearing

The F627 flanged ball bearing (F and MF series) has a 7 mm bore, a 22 mm outside diameter and a width of 7 mm. Get it as simplified STEP files. Its flange is 25 mm across and 1.5 mm thick.

F627 flanged ball bearing, F and MF series

How these parts are made, and what the levels mean: read the method

  • Also known as: F627 flange bearing, F627 MF bearing, F627 F bearing, F627 flanged miniature bearing
  • Model id: bearings-miniature-flanged-f627
  • Standard: F and MF series · size F627

Files

Part keySimplified
bearings-miniature-flanged-f627STEP

Dimensions

Dimension symbols for F627 flanged ball bearings (F and MF series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter77nominalL1
DOutside diameter2222nominalL1
BWidth77nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1
D1Flange diameter2525nominalL1
C1Flange width1.51.5nominalL1

Drawing

Drawing of the F627 flanged ball bearing with its values (F and MF series)

As a PDF: CC-BRG-MINI-FL-SZ-F627.pdf.

The F627 flanged ball bearing beside the F697 and the MF128

The F627 is number 33 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.

  • Bore diameter (d): 7 mm on the F627 flanged ball bearing, against 7 mm on the F697 and 8 mm on the MF128.
  • Outside diameter (D): 22 mm on the F627 flanged ball bearing, against 17 mm on the F697 and 12 mm on the MF128.
  • Width (B): 7 mm on the F627 flanged ball bearing, against 5 mm on the F697 and 2.5 mm on the MF128.
  • Chamfer dimension (r): at least 0.3 mm on the F627 flanged ball bearing, against at least 0.3 mm on the F697 and at least 0.1 mm on the MF128.
  • Flange diameter (D1): 25 mm on the F627 flanged ball bearing, against 19 mm on the F697 and 13.2 mm on the MF128.
  • Flange width (C1): 1.5 mm on the F627 flanged ball bearing, against 1.2 mm on the F697 and 0.6 mm on the MF128.

Other sizes

Conventions

  • Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature-flanged, nsk-miniature-flanged. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-FL-DS-F627.pdf

* CC-BRG-MINI-FL-DS-F627 revA '?) CommunityCAD Size datasheet - F627 F and MF series F627 flanged miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 7 mm shafts Part keys bearings - miniature - flanged- 627 Files…

View full datasheet →

docs/CC-BRG-MINI-FL-SZ-F627.pdf

Flanged miniature deep groove ball bearing, F and MF series, F627 Size drawing - F627 values on the views - F627 shown. Built from: open F627 - enlarged 2:1 Bearing F627 22.000 2 0.300 25.000 Source levels Main value = the modeled value (nominal, else the middle of min-max). d = 7.000 Grey under a…

View full datasheet →